Advanced Materials Processing Laboratory

Northeastern University

Selected Publications

·  V. Bialiauskaya and T. Ando, “Nucleation Kinetics of Continuously Cooling Fe-17at.%B Droplets Produced by Controlled Capillary Jet Breakup,” Journal of Materials Processing Technology, Vol. 210, Issue 3, February 2010, pp. 487-496.

 

·  S.K. Pillai and T. Ando, “Modeling of the In-flight Solidification of Droplets Produced by the Uniform-Droplet Spray Process,” J. Thermal Sciences, Vol. 48, Issue 8, August 2009, pp. 1495-1500.

 

• S. Li, P. Wu, W. Zhou and T. Ando, “Modeling of the Microstructural Evolution in Gas-Atomized Sn-5mass%Pb Droplets,” Materials Science and Engineering A, Vol. 499, 2009, pp. 396-403.

 

• T. Ando, “Alloy Processing with Uniform Droplets for Improved Structural Control,” Keikinzoku (J. Japan Inst. Light Metals), Vol. 58, 2008, pp. 305-11.

 

• S. Onel and T. Ando, “Comparison and Extension of Free Dendritic Growth Models with Application to Ag-15at.%Cu Alloy,” Metall. Mater. Trans. A, Vol. 39A, 2008, pp. 2449-58.

 

• Li, S., Wu, P., Zhou, W., and Ando, T., “Kinetics of Heterogeneous Nucleation of Sn-5mass%Pb Droplets of Gas-Atomized Sprays,” Materials Science and Engineering A, Vol. 473, 2008, pp. 206-12.

 

• H. Lu, P. Kadolkar, K. Nakazawa, T. Ando and C. A. Blue, “Precipitation Behavior of AA2618,” Metall. Mater. Trans. A, Vol. 38A, 2007, 2379-88.

• M. Alaeddine, R. Ranganathan, T. Ando and C.C. Doumanidis, “Thermal Modeling and Control in Production of Intermetallic Coatings from Layered Precursors,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 129/Issue 1, 2007, pp. 56-65.

 

• A. Gural, S. Tekeli, and T. Ando, “Tensile Properties of Iron-Based P/M Steels with Ferrite+Martensite Microstructure,” Journal of Materials Science, Vol. 41/No. 23, 2006, pp.7894-7901.

 

• M. Alaeddine, R. Ranganathan, T. Ando, and C.C. Doumanidis, “Modeling the Intermetallic Coating Growth During Reactive Melting of Layered Precursors,” Surface and Coating Technology, Vol. 200/Issues 18-19, 2006, pp. 5181-5192.

 

• J. Fukai and T. Ando, ^“Microstructure Development in Alloy Splats during Rapid Solidification,” Mater. Sci. Eng. A, Vol. 383, Issue 1, 2004, pp. 175-183.

• Y. Nishida, T. Ando, M. Nagase, S.-W. Lim, I. Shigematsu, and A. Watazu, “Billet Temperature Rise during Equal-Channel Angular Pressing,” Scripta Mater., Vol.46, 2002, pp. 211-216.

 

• C. D. Tuffile and T. Ando, “Epitaxial Crystal Growth in Sn and Sn-Pb Alloys Processed by Mono-Size Droplet Deposition,” J. Mater. Proc. & Manuf. Sci., 2001, Vol. 8, pp. 232-244.

 

• S. Matsuo, T. Ando, and N. J. Grant, “Grain Refinement and Stabilization in Spray Formed AISI 1020 Steel,” Materials Science and Engineering A, 2000, vol. A34, 2000, pp. 34-41.

 

• X. Dong, C. D. Tuffile, and T. Ando, “Continuous-Cooling-Transformation Curves for the Heterogeneous Nucleation on the Surface of Sn-5 Mass% Pb Droplets,” Advanced Engineering Materials, vol.2, No. 5, 2000, pp. 286-289.

 

• T. Ando, J.-H. Chun, and C. A. Blue, "Uniform Droplets Benefit Advanced Particulates,” Metal Powder Report, Vol. 54 No. 3, 1999, pp. 30-34.

 

• A. DiVenuti and T. Ando, "A Dendrite Growth Model Accommodating Curved Phase Boundaries and High Peclet Number Conditions," Metall. Mater. Trans. A. Vol. 29A, 1998, pp. 3047-3056.

 

• C. D. Tuffille, A. G. DiVenuti, T. Ando and J-H. Chun, "Calorimetric Enthalpy Measurement of Traveling Uniform Droplets, "J. Materials Synthesis and Processing", vol. 5, no. 1, 1997, pp. 31-37.

 

• C. H. Passow, J. H. Chun and T. Ando, "Spray Deposition of a Sn - 40 wt. % Pb Alloy with Uniform Droplets," Metall. Trans., vol. 24A, 1993, pp. 1187-93.