Barabino, G.A., Wise, R.J., Lawler, J. and Ewenstein, B.M., "Inhibition of Sickle Erythrocyte Adhesion to Immobilized Thrombospondin by von Willebrand Factor," Annals of Biomedical Engineering, Vol. 24, Suppl. 1, 1996, p. 33.

Kasschau, M.R., Barabino, G.A., Bridges, K.R. and Golan, D.G., "Adhesion of Sickle Neutrophils and Erythrocytes to Fibronectin," Blood, Vol. 87, 1996, p. 771.

Bridges, K.R., Barabino, G.A., Brugnara, C., Christoph, G., Cho, M., Dover, G., Ewenstein, B., Golan, D.G., Gutmann, C., Hofrichter, J., Mulkern, R. and Zhang, B., "A Multiparameter Analysis of Patients Undergoing Hydroxyurea Therapy," Blood, Vol. 88, 1996, pp. 4701-4710.

Finocchio, E., Ramis, G., Busca, G., Lorenzelli, V. and Willey, R.J., "On the Mechanisms of Light Alkane Catalytic Oxidation and Oxy-dehydrogenation: An FT-IR Study of the n-butane Conversion over MgCr₂O₄ and a Mg-Vanadate Catalyst," Catalysis Today, Vol. 28, 1996, pp. 381-389.

Shuckerow, J.I., Steciak, J.A., Wise, D.L., Levendis, Y.A., Simons, G.A., Gresser, J.D., Gutoff, E.B. and Livengood, C.D., "Control of Air Toxin Particulate and Vapor Emissions After Coal Combustion Utilizing Calcium Magnesium Acetate," Resources, Conservation and Recycling, Vol. 16, 1996, pp. 15-69.

Mogul, M.G., Akin, H., Hasirci, N., Trantolo, D.J., Gresser, J.D. and Wise, D.L., "Controlled Release of Biologically Active Agents for Purposes of Agricultural Crop Management," Resources, Conservation and Recycling, Vol. 16, 1996, pp. 289-320.

Wise, D.L., Dat, N.X., Augenstein, D.C. and Khien, N.D., "Fuel Gas and Compost Production from Combined Municipal Solid Waste and Sewage Sludge in Hanoi, Vietnam Based on the Northeastern University Press," Resources, Conservation and Recycling, Vol. 16, 1996, pp. 265-279.

Yen, N.T., Oanh, N.T.K., Reutergardh, L.B., Wise, D.L. and Lan, T.T., "An Integrated Waste Survey and Environmental Effects of COGIDO, A Bleached Pulp and Paper Mill in Vietnam, on the Receiving Waterbody," Resources, Conservation and Recycling, Vol. 18, 1996, pp. 161-174.

Finocchio, E., Willey, R.J., Ramis, G., Busca, G. and Lorenzelli, V., "Hydrocarbon Activation and Oxidation on Transition Metal Mixed Oxides: FT-IR and Flow Reactor Studies," Studies in Surface Science and Catalysis, edited by J.W. Hightower, W.N. Delgass, E. Iglesia, and A.T. Bell, Elsevier Science, Vol. 101, 1996, pp. 483-485.

Willey, R.J., Problem Set - Heat Transfer, prepared for SACHE (Safety and Chemical Engineering Education) as a product of the AIChE-CCPS, 1996.

Wise, D.L., Trantolo, D.J., Altobelli, D.E., Yaszemski, M.J. and Gresser, J.D., Editors, Human Biomaterials Applications, Humana Press, 1996.

Gresser, J.D., Trantolo, D.J., Wise, D.L., Altobelli, D.E., Yaszemski, M.J., Wnek, G.E., N.U. et al., "Bioploymer Alloy for Surgical Plates," in Human Biomaterials Applications, edited by D.L. Wise, et al., Humana Press, 1996, pp. 99-113.

Gresser, J.D., Trantolo, D.J., Wise, D.L., Altobelli, D.E., Yaszemski, M.J. and Wnek, G.E., "Bone Cement Part I: Biopolymer for Avulsive Maxillofacial Repair," in Human Biomaterials Applications, edited by D.L. Wise, et al., Humana Press, 1996, pp. 169-185.

Gresser, J.D., Trantolo, D.J., Nagaoka, H., Wise, D.L., Altobelli, D.E., Yaszemski, M.J. and Wnek, G.E., "Bone Cement Part II: Biomaterials to Restore Function in People With Physical Disabilities," in Human Biomaterials Applications, edited by D.L. Wise, et al., Humana Press, 1996, pp. 187-201.

Otute, A., Jimoh, A.G., Wise, D.L., Barabino, G.A., Trantolo, D.J. and Gresser, J.D., "Multiphasic or ‘Pulsatile’ Controlled Release System for the Delivery of Vaccines," in Human Biomaterials Applications, edited by D.L. Wise, et al., Humana Press, 1996, pp. 319-343.

Trantolo, D.J., Gresser, J.D., Jimoh, A.G., Wise, D.L., Rhodes, R.C. and Hall, J.E., "Slow Release of an LHRH Analog to Reduce Serum Testosterone," in Human Biomaterials Applications, edited by D.L. Wise, et al., Humana Press, 1996, pp. 379-392.

Gresser, J.D., Trantolo, D.J., Lyons, C.H., Nagaoka, H., Shuster, L., Swift, R.M. and Wise, D.L., "In Vitro and In Vivo Release of Naltrexone from Two Types of Poly(lactide-co-glycolide) Matrices," in Human Biomaterials Applications, edited by D.L. Wise, et al., Humana Press, 1996, pp. 431-456.

Wise, D.L., Gresser, J.D., Trantolo, D.J. and Wnek,G.E., Method of Making Biopolymer-Based Nonlinear Optical Materials, No. 5,512,218 of April 30, 1996.

Wise, D.L., Senior Editor, Special Issue on "Pollution Control and Management and Environmental Toxicology," Resources, Conservation and Recycling, Vol. 16, 1996.

Wise, D.L., Guest Editor, Special Issue on "Global Environmental Biotechnology,’’ Proceedings of the Third International Society for Environmental Biotechnology, Resources, Conservation and Recycling, Vol. 18, 1996.

Wise, D.L., Member of Editorial Board, Resources, Conservation and Recycling, published by Elsevier Science Inc.

Wise, D.L., President, Int. Society for Environmental Biotechnology (ISEB), 1996-1998.

Wise, D.L., Organizer and Chair, Int. Symposium on Environmental Biotechnology, Northeastern University, 1996.

Miralles-Wilhelm, F. and Gelhar, L.W., "Stochastic Analysis of Sorption Macrokinetics in Heterogeneous Aquifers," Water Resources Research, Vol. 32(6), 1996, pp. 1541-1549.

Miralles-Wilhelm, F. and Gelhar, L.W., "Stochastic Analysis of Transport and Decay of Solute in Heterogeneous Aquifers," Water Resources Research, Vol. 32(12), 1996, pp. 3451-3459.

Oluokun, F.A. and Burdete, E.G., "Swedge Bolts: High Performance Anchorage in Concrete," ACI Concrete International, Vol. 18, No. 11, 1996, pp. 28-33.

Sheahan, T.C., Ladd, C.C. and Germaine, J.T., "Rate Dependent Undrained Shear Behavior of Saturated Clay," ASCE Journal of Geotechnical Engineering, Vol. 122(2), 1996, pp. 99-108.

Sheahan, T.C. and Watters, P.J., "Using an Automated Rowe Cell for Consolidation Testing," ASTM Geotechnical Testing Journal, Vol. 19(4), 1996, pp. 354-363.

Wadia-Fascetti, S. and Smith, H.A., "Calibration of Structural Models Using Fuzzy Mathematics," Microcomputers in Civil Engineering, Vol. 11(1), 1996, pp. 19-35.

Sordo, E. and Bernal, D., "Dynamic Instability Phenomenon in Bi-directional System," 11^th World Conference on Earthquake Engineering, Acapulco, Mexico, 1996, Paper No. 327.

Bernal, D., "Influence of Ground Motion Characteristics on the Effectiveness of Tuned Mass Dampers," 11^th World Conference on Earthquake Engineering, Acapulco, Mexico, 1996, Paper No. 1455.

Bernal, D. and Tarnowski, M., "Residual Moments in Shakedown Analysis," Proceedings of the Xth Mexican Conference on Structural Engineering, Merida, Mexico, 1996, pp. 78-85.

Sordo, E. and Bernal, D., "Collapse of Eccentric Systems," Proceedings of the Xth Mexican Conference on Structural Engineering, Merida, Mexico, 1996, pp. 419-423.

Cochrane, J.J., Banoub, A. and Hellweger, F.L., "Growing New LIMS – Computerized Laboratory Information Systems," in Operations Forum, Water Environment Federation, Vol. 13, No. 2, February, 1996.

Alvarado, I. and Sheahan, T.C., "Undrained Shear Behavior of Clays at High Strain Rates," Proceedings of the 49^th Canadian Geotechnical Conference, St. John’s, 1996, pp. 761-768.

Sheahan, T.C. and Alvarado, I., "A New Experimental Device for Determining Reinforcement Mechanisms in Soil Nails," Proceedings of the Int. Symposium on Earth Reinforcement, Fukuoka, Japan, 1996, pp. 145-150.

Basu, S., Sreenivasan, V. and Wei, I., "Advanced Chemical Oxidation and Toxicity Reduction of 2,4,6-Trichlorophenol by Using Fenton’s Reagent – Part III A Comparison with UV-Peroxide Treatment," Proceedings of the 51^st Purdue Industrial Waste Conference, Purdue University, West Lafayette, Indiana, Ann Arbor Press, Chelsea, Michigan, May, 1996, pp. 175-185.

Ghahraman, V.G. and Yegian, M.K., "Risk Analysis for Earthquake-Induced Permanent Deformations of Earth Dams," Proceedings of the 11^th World Conference on Earthquake Engineering, Acapulco, Mexico, June, 1996, Paper No. 688.

Sheahan, T.C. and Kaliakin, V.N., Editors, Measuring and Modelling Time Dependent Soil Behavior, ASCE Geotechnical Special Publication, No. 61, 1996.

Hsu, M. and Wei, I., High Efficiency Energy Conversion and Treatment of Organic Waste, No. 5,500,306 of March 19, 1996.

Furth, P., "Integration of Fareboxes with Other Electronic Devices on Transit Vehicles," Transportation Research Record 1557, Transportation Research Board, 1996, pp. 21-27.

Zvonar, Z., Brady, D. and Catipovic, J.A., "Adaptive Detection for Shallow-Water Acoustic Telemetry with Cochannel Interference," IEEE Transactions on Oceanic Engineering, Vol. 21, No. 4, 1996, pp. 1-10.

Carilho, E., Ruis-Martines, M., Berka, J., Smirnov, I., Goetzinger, W., Miller, A., Brady, D. and Karger, B.L., "Rapid DNA Sequencing of More Than 1000 Bases per Run by Capillary Electrophoresis Using Replaceable Linear Polyacrylamide Solutions," Analytical Chemistry, Vol. 68, No. 19, 1996, pp. 3305-3313.

Zvonar, Z. and Brady, D., "Linear Multipath-Decorrelating Receivers for CDMA Frequency-Selective Fading Channels," IEEE Transactions on Communications, Vol. 44, No. 6, 1996, pp. 650-653.

Florentine, M., Buus, S. and Poulsen, T., "Temporal Integration of Loudness as a Function of Level," Journal of the Acoustical Society of America, Vol. 99, 1996, pp. 1633-1644.

Buus, S., Zhang, L. and Florentine, M., "Stimulus-driven, Time-varying Weights for Comodulation Masking Release," Journal of the Acoustical Society of America, Vol. 99, 1996, pp. 2288-2297.

Husein, I., Zhou, Y.Z., Allen, R.C. and Chan, C., "Synthesis of Carbon Nitride Thin Films by Vacuum Arcs," Materials Science and Engineering, Vol. A 209, 1996, pp. 10-15.

Qin, S., Berstein, J.D. and Chan, C., "Hydrogen Etching for Semiconductor Materials in Plasma Doping Experiments," Journal of Electronic Materials, Vol. 25, 1996, pp. 507-511.

Qin, S., Chan, C. and Jin, Z., "Plasma Immersion Ion Implantation Model Including Multiple Charge State," Journal of Applied Physics, Vol. 79, No. 7, 1996, pp. 3432-3436.

Qin, S., Jin, Z. and Chan, C., "An Equivalent Circuit and Effective Impedance of a Plasma During a High Voltage Pulse," Nuclear Instruments and Methods in Physics Research B, Vol. B114, 1996, pp. 288-292.

Qin, S., Bernstein, J.D., Chan, C., Shao, J. and Denholm, S., "High Dose Rate Hydrogen Plasma Ion Implantation," Surface and Coatings Technology, Vol. 85, 1996, pp. 56-59.

Bernstein, J.D., Qin, S., Chan, C. and King, T-J., "High Dose-Rate Hydrogen Passivation of Polycrystalline Silicon CMOS TFTs by Plasma Ion Implantation," IEEE Transactions on Electron Devices, Vol. 43, No. 11, 1996, pp. 1876-1882.

Chu, P.K., Qin, S., Chan, C., Cheung, N.W. and Larson, L.A., "Plasma Immersion Ion Implantation - A Fledgling Technique for Semiconductor Processing," Materials Science and Engineering Reports, Vol. R17, No. 6-7, 1996, pp. 207-280.

Hussein, I.F., Zhou, Y.Z., Chan, C., Kleiman, J., Gudimenko, Y. and Cooper, C., "Synthesis of Carbon Nitride Thin Films by Vacuum Arcs," Materials Science and Engineering, Vol. A 209, 1996, pp. 10-15.

Chu, P., Chan, C. and Cheung, N., "Recent Applications of Plasma Immersion Ion Implantation," Semiconductor International, 1996, pp. 165-172.

Qin, S., Bernstein, J.D. and Chan, C., "Hydrogen Etching Effects During Plasma Doping Processes and Impact on Shallow Junction Formation," Ion-Solid Interactions for Materials Modification and Processing, edited by D.B. Poker, D. Ila, Y-T. Cheung, L.R. Harriott and T.W. Sigmon, Vol. 396, 1996, pp. 509-514.

Qin, S., Bernstein, J.D., Zhou, Y.Z., Chan, C. and King, T-J., "Short-time Hydrogen Passivation of Poly-Si CMOS Thin Films Transistors by High Dose Rate Plasma Ion Implantation," Ion-Solid Interactions for Materials Modification and Processing, edited by D.B. Poker, D. Ila, Y-T. Cheung, L.R. Harriott and T.W. Sigmon, Vol. 396, 1996, pp. 515-20.

Crisman, J., Kanojia, C. and Zeid, I., "Graspar: An Easily Controllable, Flexible Robotic Hand," IEEE Robotics and Automation Society Magazine, Vol. 3, No. 2, 1996, pp. 32-38.

Crisman, J., "System Design via Small Mobile Robots," IEEE Transactions on Education, Vol. 39, No. 2, 1996, pp. 275-281.

Dunn, A. and DiMarzio, C.A., "Efficient Computation of Time-Resolved Transfer Functions for Imaging in Turbid Media," Journal of the Optical Society of America, Vol. A 13, No. 1, 1996, pp. 65-70.

Forgotson, N., Khemka, V. and Hopwood, J., "Inductively Coupled Plasma for Polymer Etching of 200 mm Wafers," J. Vac. Sci. Technology, Vol. B 14(2), 1996, pp. 732-737.

Kaeli, D.R., LaMaire, O., White, W., Hennet, P. and Starke, W., "Real-Time Trace Generation," International Journal of Computer Simulation, Vol. 6, No. 1, 1996, pp. 53-68.

Soderquist, P. and Leeser, M., "Area and Performance Tradeoffs in Floating-Point Division and Square Root Implementations," ACM Computing Surveys, Vol. 28, No. 3, 1996, pp. 518-564.

Khan, B. and Lehman, B., "Setpoint PI Controllers for Systems with Large Normalized Dead Time," IEEE Transactions on Control Systems Technology, Vol. 4, No. 4, 1996, pp. 459-466.

Lehman, B. and Bass, R., "Switching Frequency Dependent Averaged Models for Pwm dc-dc Converters," IEEE Transactions on Power Electronics, Vol. 11, No. 4, 1996, pp. 89-98.

Lehman, B. and Bass, R., "Extensions of Averaging Theory to Power Electronics," IEEE Transactions on Power Electronics, Vol. 11, No. 4, 1996, pp. 542-553.

Lehman, B., Graef, J. and Sahay, D., "Vibrational Control of One and Two Species Harvested Population Models with a Delay," Automation and Remote Control, Vol. 57, No. 2, 1996, pp. 177-186. Russian version of the paper appeared in Avtomatika i Telemekhanika, Vol. 2, 1996, pp. 34-47.

Stellakis, H.M. and Manolakos, E.S., "Adaptive Computation of Higher Order Moments and its Systolic Realization," International Journal of Adaptive Control and Signal Processing (special issue on Adaptive Signal Processing and Higher Order Statistics), Vol. 10(2/3), 1996, pp. 283-302.

Kechriotis, G. and Manolakos, E.S., "A Hybrid Digital Signal Processing - Neural Network CDMA Multi-user Detection Scheme," IEEE Transactions on Circuits and Systems-II Analog and Digital Signal Processing, Vol. 43(2), 1996, pp. 96-104.

Kechriotis, G. and Manolakos, E.S., "Hopfield Neural Networks Implementation of the Optimal CDMA Multiuser Detector," IEEE Transactions on Neural Networks, Vol. 7(1), 1996, pp. 131-141.

McIlrath, L.D., "A CCD/CMOS Focal-Plane Array Edge Detection Processor Implementing the Multi-Scale Veto Algorithm," IEEE Journal of Solid State Circuits, Vol. 31:9, 1996, pp. 1239-1247.

Miller, E.L. and Willsky, A.S., "A Multiscale, Statistically-Based Inversion Scheme for the Linearized, Inverse Scattering Problem," IEEE Transactions on Geoscience and Remote Sensing, Vol. 34, No. 2, 1996, pp. 346-357.

Miller, E.L. and Willsky, A.S., "Wavelet-Based Methods for the Nonlinear Inverse Scattering Problem Using the Extended Born Approximation," Radio Science, Vol. 31, No. 1, 1996, pp. 51-65.

Aksu, H.A. and Salehi, M., "Joint Optimization of TCQ-TCM Systems," IEEE Transactions on Communications, Vol. 44, No. 5, 1966, pp. 529-533.

Salehi, M., "Reducing Computational Complexity in the Derivation of Capacity Regions in Network Information Theory," Computers and Electrical Engineering: An International Journal, Vol. 22, No. 4, 1996, pp. 247-256.

Sandler, S.S. and King, R.W.P., "Electric Fields and Currents Induced In Organs of the Human Body when Exposed to ELF and VLF Electromagnetic Fields," Radio Science, Vol. 31, No. 5, 1996, pp. 1153-1167.

Serafim, P.E. and Esarey, et al., "Radiation Generation by Photoswitched Periodically Biased Semiconductors," Physical Review E, Vol. 53, No. 5, 1996, pp. 1-8.

Kim, K. and Shafai, B., "Finite Impulse Response Estimator (FIRE)," MITRE Journal 1996, pp. 155-163. (See also IEEE Trans. on Signal Processing 1995). Best Paper Award, MITRE’s Technology Program.

Shafai, B., Beale, S., Niemann, H.H. and Stoustrup, J.L., "LTR Design of Discrete-time Proportional-integral Observers," IEEE Transactions on Automatic Control, Vol. 41, 1996, pp. 1056-1062.

Jacobson, C.A., Stankovic, A.M., Tadmor, G. and Stevens, M.A., "Towards a Dissipativity Framework for Power System Stabilizer Design," IEEE Transactions on Power Systems, Vol. 11(4), 1996, pp. 1963-1968.

Stankovic, A.M. and Lesieutre, B.C., "A Probabilistic Approach to Modeling Clusters of Induction Machines," IEEE Transactions on Power Systems, Vol. 11(4), 1996, pp. 1983-1989.

Eissa, M.O., Leeb, S.B., Verghese, G.C. and Stankovic, A.M., "A Fast Analog Controller for a Unity Power Factor AC/DC Converter," IEEE Transactions on Power Electronics, Vol. 11, No. 1, 1996, pp. 1-6.

Jacobson, C.A., Stankovic, A.M. and Tadmor, G., "On the Reduction of Certain Frequency Shaped Linear Quadratic Dissipative Design Problems to An H-infinity Formulation," IEEE Transactions on Automatic Control, Vol. 41, No. 1, 1996, pp. 121-125.

Stojanovic, M., Proakis, J.G. and Catipovic, J.A., "Performance of a High Rate Adaptive Equalizer on a Shallow Water Acoustic Channel," Journal of the Acoustical Society of America, Vol. 100(4), Pt. 1, 1996, pp. 2213-2219.

Zvonar, Z. and Stojanovic, M., "Performance of Antenna Diversity Multiuser Receivers in CDMA Channels with Imperfect Fading Estimation," Wireless Personal Communications, special Issue on Signal Separation and Interference Cancellation for Personal, Indoor, and Mobile Radio Communications (PIMRC), Vol. 3, 1996, pp. 91-110.

Stojanovic, M., "Recent Advances in High Rate Underwater Acoustic Communications," IEEE Journal of Oceanic Eng., 1996, pp. 125-136.

Stojanovic, M. and Zvonar, Z., "Multichannel Processing of Broadband Multiuser Communication Signals in Shallow Water Acoustic Channels," IEEE Journal of Oceanic Eng., 1996, pp. 156-166.

Chren, Jr., W., Cleaver, T., Cook, C., Ogunfunmi, T., Richolson, R. and Vai, M.M., "Introducing Electronic Design Automation Tools into the Engineering Curriculum," Journal of Engineering Education, July, 1996, pp. 247-252.

Howells, G.D., Prance, R.J., Clark, T.D., Watkins, C. and Vittoria, C., "Imaging the Magnetic Properties at the 1 mm Length Scale," Journal of Magnetism and Magnetic Materials, Vol. 155, 1996, pp. 55-56.

Zhang, S. and Vittoria, C., "Measurements and Simulation of Micron Size Coplanar Waveguides," J. Appl. Phys., Vol. 79, 1996, pp. 5739-5744.

How, H., Schmidt, R. and Vittoria, C., "Nonlinear Coupling in Ferrite Circulator Junctions," IEEE Trans., Vol. MTT-45(2), 1996, pp. 727-730.

How, H., Fang, T.M., Vittoria, C. and Schmidt, R., "Magnetic Losses in Stripline/Microstrip Circulators," J. Appl. Phys., Vol. 79, 1996, pp. 5739-5747.

How, H., Champion, M.H., Southall, H.L. and Vittoria, C., "Antenna Array on Ferrite Substrates," IEEE Trans., Vol. MAG-33, 1996, pp. 735-738.

Zavracky, P.M., Hartley, F., McClelland, B. and Sherman, N., "Design and Process Considerations for a Tunneling Tip Accelerometer," J. MicroMechanics and Microengineering, Vol. 6, No. 3, 1966, pp. 352-358.

Vu, Q-B. and Zavracky, P.M., "Patterned Eutectic Bonding with Al/Ge Thin Films for Microelectromechanical Systems," J. Vac. Sci. Technology, Vol. B 14(4), 1996, pp. 2588-2594.

Vu, Q-B., Stricker, D.A. and Zavracky, P.M., "Surface Characteristics of (100) Silicon Anisotropically Etched in Aqueous KOH," J. Electrochem. Soc., Vol. 143, No. 4, 1996, pp. 1372-1375.

Brooks, D.H., Krim, H., Pesquet, J.C. and MacLeod, R.S., "Best Basis Segmentation of ECG Signals Using Novel Optimality Criteria," Proceedings of ICASSP '96, Atlanta, Georgia, May, 1996.

Krim, H. and Brooks, D.H., "Feature-Based Segmentation of ECG Signals," Proceedings of IEEE Symposium on Time-Frequency and Time-Scale, Paris, France, June, 1996.

Brooks, D.H., Srinidhi, K., Kaeli, D.R. and MacLeod, R.S., "Parallelized Convex Optimization for Joint Time/Space Inverse Electrocardiography," Proceedings of the 18^th Ann. IEEE EMBS Conf., Amsterdam, The Netherlands, October, 1996.

Griebel, S., Brooks, D.H., Philip, J.H., Mandel, J. and Calalang, I., "Time-Frequency Analysis of Heart Sounds During General Anesthesia," presented at BioMedical Engineering Society Annual Meeting, Penn. State University, abstract in Ann. Biomed. Eng., Vol. 24 , Suppl. 1, 1996, p. S-41.

Brooks, D.H. and MacLeod, R.S., "Inverse Electrocardiography with Multiple Constraints Using an Admissible Solution Approach," presented at invited special session BioMedical Engineering Society Annual Meeting, Penn. State University, abstract in Ann. Biomed. Eng., Vol. 24 , Suppl. 1, 1996, p. S-58.

Gaudette, R.J., Brooks, D.H., MacLeod, R.S. and Krim, H., "Multi-Resolution Identification of Wavefronts from Epicardial Plaque Potentials," presented at BioMedical Engineering Society Annual Meeting, Penn. State University, abstract in Ann. Biomed. Eng., Vol. 24, Suppl. 1, 1996, p. S-60.

Buus, S. and Florentine, M., "A New Method for Estimating the Signal-Component Importance: Application to Comodulation Masking Release," Fechner Day ’96, Proceedings of the 12^th Annual Meeting of the International Society of Psychophysics, edited by S.C. Masin, Padua, Italy, 1996, pp. 227-232.

Qin, S., Zhou, Y.Z., Warner, K., Chan, C., Shao, J. and Denholm, S., "N-Type Doping Experiments by Plasma Immersion Ion Implantation Using PH₃ SDS System," Proceedings of the 1996 Fall Meeting of the Materials Research Society, Boston, Massachusetts, December 2-6, 1996, p. 20.

Zhou, Y.Z., Qin, S. and Chan, C., "Investigation of Plasma Immersion Ion Implantation Hydrogenation for Poly-Si TFT’s Using an ICP Plasma Source," Proceedings of the 1996 Fall Meeting of the Materials Research Society, Boston, Massachusetts, December 2-6, 1996, p. 16.

Chan, C., Qin, S., Zhou, Y.Z., Liu, W., Wu, S., Vai, M.M., Bursuc, I., Shao, J. and Denholm, S., "Plasma Ion Implantation for Flat Panel Displays," Proceedings of the 1996 Fall Meeting of the Materials Research Society, Boston, Massachusetts, December 2-6, 1996, p. 20.

Chan, C., Qin, S., Zhou, Y.Z., Husein, I., Shao, J. and Denholm, S., "Computer Simulation and Modeling of Plasma Doping Processes," Proceedings of the SEMATECH Doping Program PTAB Conference, Austin, Texas, October 22-23, 1996, pp. 61-89.

Hussein, I., Qin, S., Zhou, Y.Z. and Chan, C., "Surface Modifications of Polymer Materials by Plasma Immersion Ion Implantation Technique," Proceedings of 1996 Fall Meeting of the Materials Research Society, Boston, Massachusetts, December 2-6, 1996, p. 25.

Qin, S. and Chan, C., "Plasma Doping for Semiconductor Experiments and Modeling," Proceedings of Defense Advanced Research Projects Agency (DARPA)/Low Power Electronics Review Meeting 1996, Reston, Virginia, May 13-15, 1996, pp. 301-318.

Qin S., Zhou, Y.Z., Hussein I. and Chan, C., "High Efficient Plasma Ion Implantation Hydrogenation for CMOS Poly-Si TFT’s Using an ICP Plasma Source," Proceedings of the 23^rd IEEE International Conference on Plasma Science, Boston, Massachusetts, June 3-5, 1996, p. 96.

Qin, S., Zhou, Y.Z. and Chan, C., "Two-dimensional Modeling and Simulation for Dynamic Sheath Expansion During Plasma Immersion Ion Implantation," Proceedings of the 23^rd IEEE International Conference on Plasma Science, Boston, Massachusetts, June 3-5, 1996, p. 198.

Cleary, M. and Crisman, J., "Canonical Targets for Mobile Robot Control by Deictic Visual Servoing," Proceedings of IEEE Conf. on Robotics and Automation, 1996, pp. 3093-3098.

DiMarzio, C.A., Devaney, A.J., Gaudette, T.J. and Lindberg, S.C., "Diffraction Tomography Using Images Generated by Quadrature Interferometry," Presented at the OSA Annual Meeting, Rochester, New York, October 21-24, 1996, Paper MJ9.

DiMarzio, C.A. and Lindberg, S.C., "Quantitative Analysis of Coherent Detection in a Turbin Medium," Biomedical Sensing, Imaging and Tracking Technologies I, Vol. 2676, 1996, Proc. SPIE 2676-56, pp. 122-129.

Eracar, Y., DiMarzio, C.A. and Kokar, M.M., "False Alarm Reduction of Ground Penetrating Radar Returns through Multisensor Fusion," Proceedings of the IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems, (MFI’96), Washington, D.C., December, 1996, pp. 33-38.

Hopwood, J., "Ionized Sputter Deposition," invited to the Symposium on ULSI Multilevel Interconnection Process Technology, Tokyo, Japan, Proceedings of the Japan Technology Transfer Association, Sputtering and Plasma Processes, Vol. 11, No. 3, July 5, 1996, pp. 51-53.

Dickson, M., Qian, F. and Hopwood, J., "Axially-Resolved Study of Highly Ionized Magnetron Sputtering," IEEE International Conference on Plasma Science, Boston, Massachusetts, June 3-5, 1996, IEEE Conference Record, p. 184.

Sinha, H. and Kaeli, D.R., "Improving Multiprocessor Scalability Using Lockup Free Caches," Proceedings of Parallel and Distributed Processing, Technology and Applications 1996, Sunnyvale, California, August, 1996, pp. 619-622.

Kaeli, D.R. and Liu, Y., "Using a BTB to Guide Data Cache Prefetching," Proceedings of the 1996 IEEE International Conference on Computer Design, Austin, Texas, October, 1996, pp. 225-230.

Kaeli, D.R., Sampogna, A.V., Green, D., Silva, M. and Sniezek, C.J., "Performance Modeling Using Object-Oriented Execution-Driven Simulation," Proceedings of the 29^th Annual Simulation Symposium, New Orleans, Louisiana, April, 1996, pp. 183-192.

Kaeli, D.R. and Hashemi, A.H., "Efficient Procedure Mapping for Improved Instruction Cache Performance," Proceedings of the Workshop on Interaction Between Compilers and Computer Architectures, San Jose, California, February, 1996, pp. ? - ? Also in the TCCA Newsletter.

Korona Z. and Kokar, M.M., "Wavelet Based Recognition Using Model Theory for Feature Selection," Proceedings of the SPIE AeroSense’96 Symposium: Wavelet Applications III, Vol. 2762, 1996, pp. 256-266.

Korona, Z. and Kokar, M.M., "Model Theory Based Fusion for Multisensor Recognition," Proceedings of the SPIE AeroSense’96 Symposium: Signal Processing, Sensor Fusion and Target Recognition V, 1996, pp. 178-189.

Korona, Z. and Kokar, M.M., "Model-Theory Based Fusion Framework with Application To Wavelet-Features Based Multisensor Target Recognition," Proceedings of the 1996 IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems, 1996, pp. 9-16.

Kokar, M.M. and Korona, Z., "Developing Open Systems Using Models and Theories of the World," Intelligent Systems: A Semiotic Perspective, Proceedings of the 1996 International Multidisciplinary Conference, Gaithersburg, Maryland, 1996, pp. 190-195.

Leeser, M., Tarafdar, S. and Li, Y., "Rapid Prototyping of Datapath Intensive Architectures with HML, an Abstract Hardware Description Language," Paper 2914-26 in Voice, Video and Data Communications, Photonics East 96, SPIE, November, 1996.

Lehman, B. and Bass, R., "Recent Advances in Averaging Theory for PWM dc-dc Converters," Proceedings of the IEEE Conference on Decision and Control, December, 1996, Vol. 4, pp. 4467-4471.

Kumar, V. and Manolakos, E.S., "Combining Soft Decision Algorithms and Scale-Sequential Hypotheses Pruning for Object Recognition," Proceedings of the 1996 Multidisciplinary Conf. on Intelligent Systems, NIST, Gaithesburgh, Maryland, 1996, invited paper in the Workshop: Intelligence of Recognition, pp. 215-220.

Pereira, M. and Manolakos, E.S., "Hierarchical Neural Network for Multiresolution Image Analysis," Proceedings of the 1996 Int’l. Conf. on Image Processing, (ICIP-96), Vol. I, Lausanne, Switzerland, September, 1996, pp. 261-264.

Kumar, V. and Manolakos, E.S., "Unsupervised Model-Based Object Recognition by Parameter Estimation of Hierarchical Mixtures," Proceedings of the 1996 Int’l. Conf. on Image Processing, (ICIP-96), Vol. III, Lausanne, Switzerland, September, 1996, pp. 967-970.

Kumar, V. and Manolakos, E.S., "Recurrent Architectures for Object Recognition by Parameter Estimation of Hierarchical Mixtures," Proceedings of the Conference on Information Sciences and Systems, (CISS’96), invited paper, Princeton, New Jersey, March 1996, pp. 1055-1060.

Lentz, K.P., Manolakos, E.S. and Czeck, E.W., "Compressing Large Simulation Using Multiple Domain Concurrent and Comparative Simulation," Proceedings of the 1996 IEEE North Atlantic Test Workshop, Hanover, New Hampshire, May, 1996, pp. 51-57.

Twarog, E.M., McLaughlin, D.J. and Allan, N., "High Resolution Polarimetric Radar Scattering Measurements of Low Grazing Angle Sea Clutter," Proceedings of IEEE Geoscience and Remote Sensing Symposium (IGARSS’96), Lincoln, Nebraska, May, 1996, pp. 1745-1748.

Dufour, R.M. and Miller, E.L., "Statistical Estimation with $1/f$-Type Prior Models: Robustness to Mismatch and Efficient Model Determination," Proceedings of ICASSP 96, Atlanta, Georgia, May, 1996, Vol. 5, pp. 2491-2494.

Li, B. and Prasad, S., "Intermodulation Analysis of the Inverted InGaAs/InAlAs/InP HBT Using Volterra Series," Proceedings of the VIII^th IEEE-URSI Asia Pacific Microwave Conference, New Delhi, India, December, 1996, pp. 347-350.

Kurtas, E., Proakis, J.G. and Salehi, M., "Performance Comparisons of MSN Codes for Multitrack Magnetic Recording Systems," Proceedings of the 1996 GLOBECOM, London, United Kingdom, November, 1996, pp. 348-352.

Kurtas, E., Proakis, J.G. and Salehi, M., "Coding for Three Track Magnetic Recording Systems," Proceedings of the Thirtieth Conference on Information Sciences and Systems, Princeton University, Princeton, New Jersey, March, 1996, pp. ? - ?

Raghavan, R.S. and Pulsone, N., "A Generalization of the Adaptive Matched Filter Receiver for Array Detection in a Class of Non-Gaussian Interference," Proceedings of the Adaptive Sensor Array Processing (ASAP) Workshop, MIT Lincoln Laboratory, Vol. 1, March, 1996, pp. 499-517.

Duman, T. and Salehi, M., "Quantization for Decentralized Detection over Noisy Channels with Interchannel Interference," Proceedings of the Thirtieth Conference on Information Sciences and Systems, Princeton University, Princeton, New Jersey, March , 1996, pp. ? - ?

Wilson, B.H., Eryilmaz, B. and Shafai, B., "Synthesizing QFT Templates of Plants with Design Parameter Uncertainty," Proceedings of the Second World Automation Congress, Vol. 4, Montpellier, France, 1996, pp. 755-760.

Niemann, H.H., Stoustrup, J. and Shafai, B., "Loop Transfer Recovery for Sampled-Data Systems," Proceedings of the 13^th IFAC World Congress, San Francisco, California, 1996, pp. 289-294.

Niemann, H.H., Stoustrup, J. and Shafai, B., "Improved Recovery in H-infinity/LTR Design," Proceedings of the 13^th IFAC World Congress, San Francisco, California, 1996, pp. 385-390.

Oloomi, H. and Shafai, B., "Constrained Stabilization Problem and Transient Mismatch Phenomena in Singularly Perturbed Systems," Proceedings of the 35^th IEEE Conf. on Decision and Control, Kobe, Japan, 1996, pp. 552-557.

Shafai, B., Uddin, V., Niemann, H.H. and Stoustrup, J., "An LMI Approach to Fixed Order LTR Controller," Proceedings of the 35^th IEEE Conf. on Decision and Control, Kobe, Japan, 1996, pp. 4769-4771.

Stankovic, A.M., Lesieutre, B.C. and Aydin, T., "Applications of Generalized Averaging to Synchronous and Induction Machines," North American Power Symposium, November, 1996, pp. 277-282.

Stankovic, A.M. and Marengo, E.A., "A Dynamical Characterization of Power System Harmonics Using Markov Chains," North American Power Symposium, November, 1996, pp. 573-580.

Stankovic, A.M., "A Dissipation Based Controller for Series Resonant DC/DC Converters," IEEE Power Electronics Specialists Conference, June, 1996, pp. 1844-1849.

Stankovic, A.M., "Towards an Effective and Integrated Power Electronics Curriculum," (invited paper), NSF Workshop on Developing Power Electronics Curriculum, University of Central Florida, March, 1996, pp. 27-31.

Stankovic, A.M., Tadmor, G. and Coric, Z., "Low Torque Ripple Control of Current-Fed Switched Reluctance Motors," IEEE Industry Applications Society Annual Meeting, Vol. 1, October, 1996, pp. 84-91.

Wu, S., Vai, M. and Prasad, S., "Reverse Modelling of Microwave Devices Using a Neural Network Approach," Proceedings of the VIII^th IEEE-URSI Asia Pacific Microwave Conference, New Delhi, India, December, 1996, pp. 951-954.

Florentine, M. and Buus, S., "Some Current Trends In Temporal Processing," in Recent Trends in Hearing Research, edited by H. Fastl, S. Kuwano, and A. Schick, Oldenburg University Press, Germany, 1996, pp. 161-192.

Chan, C., Editor-in-Chief, 1996 IEEE International Conference on Plasma Science - Conference Abstracts, copyright IEEE 96CH35939 (320 pages).

Hussein, I.F., Zhou, Y.Z., Chan, C., Kleiman, J., Gudimenko, Y. and Cooper, C., "Synthesis of Carbon Nitride Thin Films by Vacuum Arcs," in Science of Hard Materials 5, edited by V.K. Sarin, Elsevier Science, Lausanne, Switzerland, 1996, pp. 10-15.

Grabel, A., Microelectronica, Published by McGraw Hill Publishing Company, Milan, 1996, also a Korean translation of Microeletronics, Seoul, Korea, 1996.

Ingle, V. and Proakis, J.G., Digital Signal Processing Using Matlab, Published by PWS Publishing Company, Boston, Massachusetts, 1996.

Sailer, P.M. and Kaeli, D.R., DLX Instruction Set Architecture Handbook, Morgan Kaufmann Publishing, San Francisco, California, 1996.

Arabnia, H.R., Kaeli, D.R., d-Auriol, B.J., Hazra, T., Olsson, R.A., Pan, Y. and Pande, R., Editors, Proceedings of the International Conference on Parallel and Distributed Processing Techniques and Applications, PDPTA’96, Vols. 1, 2 and 3, August, 1996.

Baillieul, J. and Lehman, B., "Open-loop Control Using Oscillatory Input," in IEEE/CRC Control Handbook, edited by W. Levine, CRC Press, 1996, pp. 967-980.

Lev-Ari, H., "Displacement Structure: Two Related Perspectives," in Communications, Computing, Control and Signal Processing: A Tribute to Thomas Kailath, edited by A. Paulraj, V. Roychowdhury and C. Schaper, Kluwer Academic Publishers, Norwell, Massachusetts, 1996, pp. 233-241.

Vittoria, C., Complete Classpacs Book entitled, Transmission Line Analyses, 380 pages.

How, H. and Vittoria, C., Antenna Array Having Two Dimensional Beam Steering, US Patent No. 5,515,059, May 7, 1996.

Oliver, S.A., McKnight, S.W. and DiMarzio, C.A., Magneto-optic Kerr Effect Stress Sensing System, US Patent No. 5,493,220, February 20, 1996.

Crisman, J. and Bekey, G., "Grand Challanges for Robotics and Automation: The 1996 ICRA Panel Discussion," IEEE Robotics and Automation Society Magazine, December, 1996.

Kaeli, D., Guest Editor, IEEE Technical Committee on Computer Architecture Newsletter, Proceedings of WCAE-2, June, 1996.

Hashemi, A.H., Kaeli, D.R. and Calder, B., "Efficient Procedure Mapping Using Cache Line Coloring," DEC WRL Research Report, Vol. 96/3, 1996.

Adams, G.G., "Self-Excited Oscillations in Sliding with a Constant Coefficient of Friction - A Simple Model," ASME Journal of Tribology, Vol. 118, No. 4, 1996, pp. 819-823.

Chen, C.A., Acquaviva, P., Chun, J.H. and Ando. T., "Spray Forming of an Sn 5 wt.% Pb Alloy with a Uniform-Droplet Spray at a Low Deposition Rate," Scripta Mater., Vol. 34, No. 5, 1996, pp. 689-696.

Yim, J.H., Chun, P.W., Ando, T. and Sikka, V.K., "Production and Characterization of Mono-Sized Sn-38 wt.% Pb alloy Balls," Int. J. Powder Metall., Vol. 32, No. 2, 1996, pp. 155-164.

Brennan, L. and Gupta S.M., "Combined Demand and Lead Time Uncertainty with Back-Ordering in a Multi-Level Product Structure Environment," Production Planning and Control, Vol. 7, No. 1, 1996, pp. 57-67.

Karaesmen, F. and Gupta S.M., "The Finite Capacity GI/M/1 Queue with Server Vacations," Journal of the Operational Research Society, Vol. 47, No. 6, 1996, pp. 817-828.

Moyer, L. and Gupta S.M., "SMT Feeder Slot Assignment for Predetermined Component Placement Paths," Journal of Electronics Manufacturing, Vol. 6, No. 3, 1996, pp. 173-192.

Moore K. and Gupta, S.M., "Petri Net Models of Flexible and Automated Manufacturing Systems: A Survey," International Journal of Production Research, Vol. 34, No. 11, 1996, pp. 3001-3035.

Moyer, L. and Gupta, S.M., "Simultaneous Component Sequencing and Feeder Assignment for High Chip Shooter Machines," Journal of Electronics Manufacturing, Vol. 6, No. 4, 1996, pp. 271-305.

Gupta, S.M. and McLean, C.R., "Disassembly of Products," Computers and Industrial Engineering, Vol. 31, No. 1, 1996, pp. 225-228.

Iguchi, M., Ilegbusi, O.J., Ueda, H., Kurangaga, T. and Morita, Z. "Water Model Experiment on the Liquid Flow Behavior in a Bottom Blown Bath with Top Layer," Met. and Mater. Trans. B., Vol. 27B, 1996, pp. 35-41.

Ilegbusi, O.J., "Application of Time-Dependent Constitutive Model to Rheocast Systems," J. Materials Engineering and Performance, ASM, Vol. 5, No. 1, 1996, pp. 117-123.

Ilegbusi, O.J., "Calculation of Forced-Air Cooling of Electronic Modules with a Two-Fluid Model of Turbulence," ASME J. Electronic Packaging, Vol. 118, 1996, pp. 250-257.

Ilegbusi, O. J., Mat, M. and Andrews, M., "Effect of Atwood Number on the Kinematic Mixing of Two Fluids," J. Materials Science and Manufacturing Science, Vol. 4, 1996, pp. 323-337.

Mangin, C.N.G., Isaacs, J.A. and Clark, J.P., "Metal Matrix Composites for Automotive Engine Applications," Journal of Metals, Vol. 48, No. 2, 1996, pp. 49-51.

Larsen, C., Oey, F. and Levendis, Y.A., "An Optimization Study on the Control of NO$_x$ and Particulate Emissions from Diesel Engines," SAE publication 960473, Vol. SAE SP-1140, 1996, pp.175-192.

Panagiotou, T., Levendis, Y.A. and Delichatsios, M.A., "Measurements of Particle Flame Temperatures Using Three-Color Optical Pyrometry," Combustion and Flame, Vol. 104, No. 3, 1996, pp. 272-287.

Shuckerow, J.I., Steciak, J.A., Wise, D.L., Levendis, Y.A., Simons, G.A., Gresser, J.D., Gutoff, E. B. and Livengood, C.D., "Control of Air Toxin Particulate and Vapor Emissions after Coal Combustion Utilizing Calcium Magnesium Acetate," Resources, Conservation and Recycling, Vol. 16, 1996, pp. 15-69.

Panagiotou, T. and Levendis, Y.A., "Observations on the Combustion of Pulverized PVC and Poly(ethylene)," Combustion Science and Technology, Vol. 112, 1996, pp. 117-140.

Levendis, Y.A., Atal, A., Carlson, J., Dunayevskiy, Y. and Vouros, P., "A Comparative Study on the Combustion and Emissions of Waste Tire Crumb and Pulverized Coal," Environmental Science and Technology, Vol. 30, No. 9, 1996, pp. 2742-2754.

Panagiotou, T., Levendis, Y.A., Carlson, J., Dunayevskiy, Y.M. and Vouros, P., "Aromatic Hydrocarbon Emissions from Burning Poly(styrene), Poly(ethylene) and PVC Particles at High Temperatures," Combustion Science and Technology, Vol. 1-6, No. 91, 1996, pp. 116-117.

Melachrinoudis, E. and Helander, M.E., "A Single Facility Location Problem on a Tree with Unreliable Edges," Networks, Vol. 27, 1996, pp. 219-237.

Melachrinoudis, E. and Min, H., "Dynamic Location and Entry Mode Selection of Multinational Manufacturing Facilities: A Chance - Constrained Approach," International Transactions of Operational Research, Vol. 3, No. 1, 1996, pp. 65-76.

Nayeb-Hashemi, H., Yang, Y. and Murphy, R., "Mode I Fatigue Crack Growth in a Continuous Alumina Fiber-Reinforced Magnesium Matrix," Int. J. of Fatigue, Vol. 18, No. 5, 1996, pp. 287-296.

Pocheco, T., Nayeb-Hashemi, H. and Sallam, H.M., "Acoustic Emission in a Nextel 440 Fiber Reinforced 6061 Al Composite," J. of Acoustic Emission, Vol. 14, No. 2, 1996, pp. 85-95.

Olia, M. and Rossettos, J.N., "Analysis of Adhesively Bonded Joints with Gaps Subjected to Bending," Int. J. Solids and Structures, Vol. 33, No. 18, 1996, pp. 2681-2693.

Triantaphyllou, E. and Soyster, A.L., "An Approach to Guided Learning of Boolean Functions," Mathematical and Computer Modeling, Vol. 23, No. 3, 1996, pp. 69-86.

Triantaphyllou, E. and Soyster, A.L., "On the Minimum Number of Logical Clauses Inferred from Examples," Computers and Operations Research, Vol. 23, No. 8, 1996, pp. 783-799.

Crisman, J., Kanojia, C. and Zeid, I., "Graspar: An Easily Controllable, Flexible Robotic Hand," IEEE Robotics and Automation Society Magazine, Vol. 3, No. 2, 1996, pp. 32-38.

Kent, G.F. and Adams, G.G., "Analytical and Experimental Modeling of the Feeding of a Flexible Medium into a Molding Machine," Pamphlet Paper No. 96-WA/MET-7, at The 1996 ASME International Congress and Exposition, Atlanta, Georgia, November, 1996.

Chun, J.H. and Ando,T., "Thermal Modeling of Deposit Solidification in Uniform Droplet Spray Forming," Procedings of the 1996 NSF Design and Manuf. Grantees Conf., Albuquerque, New Mexico, January 2-5, 1996, pp. 353-354.

Cullinane, T., "An Evaluation of the Criteria Utilized for Assessing Soft Benefit in Economic Justification," Proceedings of the North American Material Handling Forum, Detroit, Michigan, 1996, pp. 267-278.

Gorlov, A.M., "Helical Turbine as a New Power for Small Hydro," Proceedings of the International Conference on Small Hydro, Kuala Lumpur, Malaysia, 1996, pp. 73-83.

Gupta, S.M. and Al-Turki, Y.A.Y., "Compensating for the Variation in Processing Times and Demand by Dynamically Adjusting the Number of Kanbans in a JIT Environment," Proceedings of the 6^th International Conference on Mechanical Design and Production, 1996, pp. 555-562.

Moore, K. and Gupta, S.M., "Petri Net-Based Analysis and Simulation of Traditional and Flexible Kanban Control Policies," Proceedings of the Japan-USA Symposium on Flexible Automation, 1996, pp. 1257-1262.

Gupta, S.M. and Taleb, K., "An Algorithm to Disassemble Multiple Product Structures with Multiple Occurrences of Parts," Proceedings of the International Seminar on Reuse, 1996, pp.153-162.

Ilegbusi, O.J., "On Two-Fluid Model of Turbulent Combustion Phenomena," Proceedings of the ASME Heat Transfer Div., Vol. 2, 1996 ASME Int. Mechanical Engineering Congress and Exposition, HTD-Vol. 333, 1996, pp. 55-75.

Ilegbusi, O.J., and Mat, M.D., "A Non-Boussinesq Model of Mixing in a 2-D Closed Cavity," Proceedings of the ASME Heat Transfer Div., Vol. 2, 1996 ASME Int. Mechanical Engineering Congress and Exposition, HTD-Vol. 333, 1996, pp. 231-246.

Isaacs, J.A., Gupta, S.M. and Messac, A., "A Decision Tool to Assess the Impact of Automobile Design on Disposal Strategies," Proceedings of the International Congress on Environmentally Conscious Design and Manufacturing, 1996, pp. 207-214.

Smilgys, R.V., Isaacs, J. and Kennedy, C.E., "Solar Reflectors Protected by an Alumina Coating: Cost and Performance," Proceedings of the Web Coaters Society Annual Meeting, San Francisco, California, November 7, 1996, pp. 234-244.

Kowalski, G.J., "Numberical Simulation of Transient Thermoreflactance of Thin Films in the Picosecond Regime," High Heat Flux Engineering III Proceedings, SPIE Meeting, Denver, Colorado, 1996, pp. 138-146.

Kowalski, G.J., "Numerical Simulation of the Nonlinear Optical Response of Bacteriorhodospin," Nonlinear Optical Liquids Proceedings, SPIE Meeting, Denver, Colorado, 1996, pp. 93-101.

Kowalski, G.J., "Improving Turbine Performance by Cooling Inlet Air Using a Waste Heat Powered Ejector Refrigerator," Proceedings of the ASME Advanced Energy System Division, Atlanta, Georgia, 1996, AES- Vol. 36, pp. 501-508.

Panagiotou, T., Levendis, Y.A., Carlson, J. and Vouros, P., "The Effect of Bulk Equivalence Ratio on the PAH Emissions from the Combustion of PVC, Poly(styrene) and Poly(ethylene)," Proceedings of the Twenty Sixth Symposium (International) on Combustion, 1996, pp. 2421-2430.

Levendis, Y.A., "Control of the Emissions of Transportation and Stationary Diesel Engines," Proceedings of the 21^st Coal Utilization & Fuel Systems International Conference, Clearwater, Florida, March 18-21, 1996, pp. 123-132.

Levendis, Y.A., Atal, A. and Courtemance, B., "Toxic Emissions from the Combustion of Pulverized Coal," Proceedings of the 21^st Coal Utilization & Fuel Systems International Conference, Clearwater, Florida, March 18-21, 1996, pp. 755-764.

Carlson, J., Dunayevskiy, Y., Vouros, P., Atal, A., Panagiotou, T. and Levendis, Y.A., "A Study of the Equivalence Ratio on Polymer Combustion Emissions by GS/MS," Presented at the 44^th ASMS Conference on Mass Spectrometry and Allied Topics, Portland, Oregon, May 12-16, 1996, pp. 517-518.

Mehta, S., Gautam, M., Levendis, Y.A. and Adiletta, J., "Regeneration of a Glass Fiber Filter Diesel Particulate Trap with a Cerium-Based Additive," Proceedings of the 29^th ISATA Conference, Florence, Italy, June 3-6, 1996, Manuscript No. 96EN063, pp. 501-509.

Messac, A., "From the Dubious Art of Constructing Objective Functions to the Application of Physical Programming," 6^th AIAA/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Paper No. AIAA-96-4123, April 7-9, 1996.

Nichols, D. and Metghalchi, M., "A Graphical Simulator For Teaching Design in a Thermodynamics Course," Proceeding of the ASME Advanced Energy System Division, Atlanta, Georgia, AES-Vol. 36, 1996, pp. 281-284.

Bishnu, P., Hamiroune, D., Metghalchi, M. and Keck, J.C., "Development of Constrained Equilibrium Codes and Their Applications in Nonequilibrium Thermodynamics," Proceeding of the ASME Advanced Energy System Division, Atlanta, Georgia, AES-Vol. 36, 1996, pp. 213-219.

Mourant, R.R., Wilson, B.H., Li, M. and Qiu, N., "A Virtual Environment For Training Overhead Crane Operators," Proceedings of the Symposium on Virtual Reality in Manufacturing Research and Education, Chicago, Illinois, October, 1996, pages 98-107.

Levine, O. and Mourant, R.R., "Effect of Virtual Display Parameters on Driving Performance in a Virtual Environments Driving Simulator," Proceedings of the 1996 Human Factors and Ergonomics Society Annual Meeting, Philadelphia, Pennsylvania, September, 1996, pp. 1136-1140.

Perry, R.F. and Signorile, R., "A Graduate School Admissions Process: An Exercise in Business Process Reengineering," Proceedings of the SCS European Simulation Conference, Genoa, Italy, 1996, pp. 182-186.

Rossettos, J.N. and Sturtevant, S.C., "Adhesive Yielding in Single Lap Joints with Voids," Proceedings ASME Symp. on Numerical Studies in Support of Inelastic Analysis, Vol. PVP12, IMECE, Atlanta, Georgia, November, 1996, pp. 231-236

Taslim, M.E., Li, T. and Spring, S.D. "Measurements of Heat Transfer Coefficients and Friction Factors in Passages Rib-Roughened on All Walls," The 41^st ASME International Gas Turbine & Aeroengine Conference & Exposition, Birmingham, England, June 1996, ASME Paper No. 96-GT-231, pp. 1-8.

Korotky, G.J. and Taslim, M.E., "Rib Heat Transfer Coefficient Measurements in a Rib-Roughened Square Passage," The 41^st ASME International Gas Turbine & Aeroengine Conference & Exposition, Birmingham, England, June 1996.

Taslim, M.E. and Lengkong, A. "45^o Rib Heat Transfer Coefficient Measurements in a Square Channel," ASME Turbo Asia ’96 Conference, Jakarta, Indonesia, November 1996, ASME Paper No. 96-TA-9, pp. 1-12.

Yener, Y. and Cipolla, J.W., "Thermophoresis of Radiating Aerosols," Radiative Transfer- I, Proceedings of the First International Symposium on Radiative Transfer, Begel House, Inc., 1996, pp. 334-351.

Zeid, I., Gupta, S.M. and Bardasz, T., "An Analogical Problem Solving Approach to Planning for Disassembly," Proceedings of the 1996 ASME Winter Annual Meeting Design for Manufacturing and Assembly, DE-Vol. 89, 1996, pp.79-89.

Adams, G.G., Bhushan, B., Connolly, D. and Wickert, J., Editors, ISPS - Vol. 2, Proceedings of the 7^th Annual Information Storage and Processing Systems Symposium, of the 1996 ASME International Congress and Exposition.

Soyster, A.L. and Ventura, J.A., "Linear Programming," Chapter in Mathematical Programming for Industrial Engineers, edited by M. Avriel and B. Golany, Marcel Dekker, 1996.

Gorlov A., Unidirectional Reaction Turbine for Reversible Flow, US No. 5,577,882, November 6, 1996.

Cullinane, T., "Getting the Most from Software," Modern Materials Handling, Vol. 51, February, 1996, p. 30.

Cullinane, T., "Don’t Overlook the Human Element of Systems," Modern Materials Handling, Vol. 51, April, 1996, p. 30.

Cullinane, T., "Putting A System to the Test," Modern Materials Handling, Vol. 51, June, 1996, p. 32.

Cullinane, T., "Software Audit Improves Usage," Modern Materials Handling, Vol. 51, August, 1996, p. 30.

Cullinane, T.,"Fixing a System Before it Breaks," Modern Materials Handling, Vol. 51, November, 1996, p. 35.

Kent, G.F. and Adams, G.G., "Analytical and Experimental Modeling of the Feeding of a Flexible Medium into a Molding Machine," Pamphlet Paper No. 96-WA/MET-7, at The 1996 ASME International Congress and Exposition, Atlanta, Georgia , November, 1996.

Wadia-Fascetti, S. and Gunes, B.V., "Considering Uncertainty in Earthquake Response Spectra," Proceedings of the ASCE Specialty Conference: Natural Disaster Reduction, Washington, D.C., December 1996, pp. 211-212.

Chiu, G.C., Wadia-Fascetti, S. and Hossein, M., "Post-Hurricane Investigations: Quantifying Damage," Proceedings of the ASCE Specialty Conference: Natural Disaster Reduction, Washington, D.C., December 1996, pp. 74-75.

Rappaport, C. "Increasing the Effectiveness of the PML ABC with Complex Mapping of the Normal Coordinate," IEEE Transactions on Magnetics, Vol. 32, No. 3, 1996, pp. 968-974.

Gurel, T. and Rappaport, C. "Anechoic Chamber Absorbing Boundary Condition for UWB Applications," Proceedings of the Second International Conference on Ultra-Wideband Short-Pulse Electromagnetics, February 1996.

Rappaport, C. and Weedon, W., "Efficient Modeling of Electromagnetic Characteristics of Soil fo rFDTD Ground Penetrating Radar Simulation," 1996 Antennas and Propagation Society/URSI Symposium Digest, June 1996, pp. 620-623.

Lorenzo, E., Rappaport, C. and Pino, A., "A Bifocal Reflector Antenna with Gregorian Configuration," 1996 Antennas and Propagation Society/URSI Symposium Digest, June 1996, pp. 234-237.

Weedon, W., Rappaport, C. and Silevitch, D., "Modeling and Stability Considerations for FDTD Analysis of Wave Propagation in Soils," 1996 SPIE Aerosense Symposium, Orlando, Florida, April 1996, pp. 245-252.

Rappaport, C. and Reidy, D., "Focused Array Radar for Real Time Imaging and Detection," 1996 SPIE Aerosense Symposium, Orlando, Florida, April 1996, pp. 202-213.