Brooks, D.H., Ahmad, G.F., MacLeod, R.S. and Maratos, G.M., "Inverse Electrocardiography by Simultaneous Imposition of Multiple Constraints," IEEE Trans. Biomed. Eng., Vol. 46, 1999, pp. 3-18.

Buus, S., "Temporal Integration and Multiple Looks, Revisited: Weights as a Function of Time," Journal of the Acoustical Society of America, Vol. 105, 1999, pp. 2466-2475.

Buus, S., Florentine, M. and Poulsen, T., "Temporal Integration of Loudness in Listeners Hearing Losses of Primarily Cochlear Origin," Journal of the Acoustical Society of America, Vol. 105, 1999, pp. 3464-3480.

Florentine, M., Buus, S. and Geng, W., "Psychometric Functions for Gap Detection in a Yes-No Procedure," Journal of the Acoustical Society of America, Vol. 106, 1999, pp. 3512-3520.

Fan, Z.N., Zeng, X., Chu, P., Chan, C. and Watanabe, M., "Surface Metal Contamination on Silicon Wafers After Hydrogen Plasma Immersion Ion Implantation," Nuclear Instruments & Methods in Physics Research B, Vol. 155, 1999, pp. 75-78.

Fan, Z., Chu, P.K., Chan, C. and Cheung, N.W., "Thickness Non-Uniformity of Silicon-On-Insulator Fabricated by Plasma Immersion Ion Implantation and Ion Cut," IEEE Trans. On Plasma Science Vol. 27, 1999, pp. 633-636.

Qin, S., Zhou, Y. and Chan, C., "Two-Dimensional Modeling and Simulation for Dynamic Sheath Expansion During Plasma Immersion Ion Implantation," IEEE Trans. On Plasma Science, Vol. 27, 1999, pp. 766-771.

Kwok, D., Chu, P., Wood, B. and Chan, C., "Particle-in-Cell and Monte-Carlo Simulation of the Hydrogen Plasma Ion Immersion Implantation Process," Journal of Applied Physics, Vol. 86, 1999, pp. 1817-1821.

Marengo, E.A. and Devaney, A.J., "The Inverse Source Problem of Electromagnetics: Linear Inversion Formulation and Minimum Energy Solution," IEEE Trans. Antennas and Propagation, Vol. 47, 1999, pp. 410-412.

Marengo, E.A., Devaney, A.J. and Ziolkowski, R.W., "New Aspects of the Inverse Source Problem with Far-Field Data," Journal of the Optical Society of America A, Vol. 16, 1999, pp. 1612-1622.

Tsihrintzis, G., Devaney, A.J. and Heyman, E., "Estimation of Object Location in Diffraction Tomography from Wide Band Scattering Data," IEEE Trans. Image Proc., Vol. IP-8, 1999, pp. 996-1001.

Tsihrintzis, G.A., Devaney, A.J. and Johansen, P.M., "Buried Object Detection and Location Estimation from Electromagnetic Field Measurements," IEEE Trans. Antennas and Propagation, Vol. 47, 1999, pp. 1742-1744.

Zhong, G. and Hopwood, J., "Ionized Titanium Deposition into High Aspect Ratio Vias and Trenches," Journal of Vacuum Science and Technology B, Vol. 17, No. 2, 1999, pp. 405-409.

Yin, Y., Messier, J. and Hopwood, J., "Miniaturization of Inductively Coupled Plasma Sources," IEEE Transactions on Plasma Science, Vol. 27, No. 5, 1999, pp. 1516-1524.

Kalamatianos, J., Khalafi, A., Kaeli, D. and Meleis, W., "Analysis of Temporal-Based Program Behavior for Improved Instruction Cache Performance," IEEE Transactions on Computers, Vol. 10, No. 2, 1999, pp. 168-175.

Hashemi, A., Kalamatianos, J., Calder, B., Kaeli, D., Khalafi, A. and Meleis, W., "Program Remapping Using Estimated Profiles," Digital Technical Journal, Special Issue on Tools and Languages, Vol. 10, No. 2, 1999, pp. 1-19.

Liu, Y., Dimitri, M. and Kaeli, D., "Branch-Directed and Pointer-Based Data Cache Prefetching," Journal of Systems Architecture: Special Issue on Microprocessor Architecture, Vol. 45, 1999, pp. 1047-1073.

Kalamatianos, J. and Kaeli, D., "Indirect Branch Predication Using Data Compression Techniques," Journal of Instruction Level Parallelism, Vol. 2, 1999, pp. 1-39.

Kokar, M.M., Baclawski, K. and Eracar, Y.A., "Control Theory-Based Foundations of Self-Controling Software," IEEE Intelligent Systems, Vol. 14, No. 3, 1999, pp. 37-45.

Kokar, M.M. and Daly, N., "IRM: The Integrated Reference Model for Open Systems Environments," Journal of Systems Integration, Vol. 9, 1999, pp. 73-108.

Korona, Z. and Kokar, M.M., "Lung Sound Recognition Using Model-Theory Based Feature Selection," Applied Signal Processing, Vol. 5, 1998 (published in 1999), pp. 152-169.

Linder, S.P., Kokar, M.M. and Korona, Z., "Q2 Symbolic Reasoning about Noisy Dynamic Systems," Journal of Intelligent and Robotic Systems, Vol. 24, 1999, pp. 295-312.

Lehman, B. and Weibel, S., "Fundamental Theorems of Averaging for Functional Differential Equations," Journal of Differential Equations, Vol. 152, 1999, pp. 160-190.

Lehman, B. and Weibel, S., "Averaging Theory for Delay Difference Equations with Time-Varying Delays," SIAM Journal of Applied Mathematics, Vol. 59, No. 4, 1999, pp. 1487-1506.

Lombardi, F., Cockburn, B. and Meyer, F.J., "Guest Editor’s Introduction, Special Issue on DRAM Architecture and Test," IEEE Design and Test Magazine, Vol. 16, No. 1, 1999, pp. 19-21.

Lombardi, F., Kim, S.S. and Kim, J.H., "Fault-Tolerant Rank Order Filtering for Image Enhancement," IEEE Transactions on Consumer Electronics, Vol. 45, No. 2, 1999, pp. 436-442.

Lombardi, F. and Gaudiot, J.L., "Guest Editor’s Introduction, Special Issue on Configurable Computing," IEEE Transactions on Computers, Vol. 48, No. 6, 1999, pp. 553-555.

Galatopoullos, D. and Manolakos, E.S., "Parallel Processing in Heterogeneous Cluster Architectures Using JavaPorts," ACM Crossroads, special issue in Computer Architectures, Vol. 5(3), 1999, pp. 26-32.

Galatopoullos, D. and Manolakos, E.S., "JavaPorts: An Environment to Facilitate Parallel Computing on Heterogeneous Cluster of Workstations," Informatica, special issue on Clustering-In search for Scalable Commodity Supercomputing, Vol. 23, 1999, pp. 97-105.

How, H., McKnight, S.W., Oliver, S.A., Zavracky, P.M., McGruer, N.E. and Vittoria, C., "Influence of Non-Uniform Magnetic Field on a Ferrite Junction Circulator," IEEE Trans. Microwave Theory and Techniques, Vol. 47, 1999, pp. 1982-1989.

Liu, T., Chen, X.-T., Meyer, F.J. and Lombardi, F., "Test Generation and Scheduling for Layout-Based Detection of Bridge Faults in Interconnects," IEEE Transactions on VLSI Systems, Vol. 7, No. 1, 1999, pp. 48-55.

Chen, X.-T., Huang, W.-K., Park, N., Meyer, F.J. and Lombardi, F., "Design Verification of FPGA Implementations by Equivalent Classes," IEEE Design & Test of Computers, Vol. 16, No. 2, 1999, pp. 66-73.

Chen, X.-T., Feng, W.-Y., Zhao, J., Meyer, F.J. and Lombardi, F., "Reconfiguring One-Time Programmable FPGAs," IEEE Micro, Vol. 19, No. 6, 1999, pp. 53-63.

Zhao, J., Meyer, F.J. and Lombardi, F., "Adaptive Fault Detection and Diagnosis of RAM Interconnects," Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 15, No. ½, 1999, pp. 157-171.

Dufour, R. and Miller, E.L., "Statistical Signal Restoration with Wavelet Domain Prior Models," Signal Processing, Vol. 78, 1999, pp. 289-307.

Sahin, A. and Miller, E.L., "Electromagnetic Scattering-Based Array Processing Methods for Near-Field Object Characterization," Journal of Electromagnetic Waves and Applications, Vol. 13, 1999, pp. 1209-1236.

Miller, E.L., "Statistically Based Methods for Anomaly Characterization in Images from Observations of Scattered Radiation," IEEE Trans. on Image Processing, Vol. 8, No. 1, 1999, pp. 92-101.

Miller, E.L., "Efficient Computational Methods for Multiscale Linear Gaussian Signal Restoration Problems," IEEE Trans. on Signal Processing, Vol. 47, No. 4, 1999, pp. 1184-1188.

Oliver, S.A., Hamdeh, H.H. and Ho, J.C., "Local Spin Canting in Partially Inverted ZnFe₂O₄ Fine Powders," Physical Review B, Vol. 60, 1999, pp. 3400-3405.

Oliver, S.A., Chen, M.L., Lubitz, P. and Vittoria, C., "Properties of Pulsed Laser Deposited Scandium-Substituted Barium Hexaferrite Films," Journal of Applied Physics, Vol. 85, 1999, pp. 4630-4632.

Vai, M. and Prasad, S., "Neural Networks in Microwave Circuit Design-Beyond Black Box Models," invited Article, International Journal of RF and Microwave CAE, Vol. 9, 1999, pp. 187-197.

Li, B., Prasad, S., Yang, L.-W. and Wang, S.C., "A Numerical Study of AlGaAs/GaAs HBT’s," Solid State Electronics, Vol. 43, 1999, pp. 839-843.

Li, B. and Prasad, S., "Basic Expressions and Approximations in Small-Signal Parameter Extraction for HBT’s," IEEE Transactions on Microwave Theory and Techniques, Vol. 47, 1999, pp. 534-539.

Li, B., Prasad, S., Yang, L.-W. and Wang, S.C, "Large Signal Characterization of AlGaAs/GaAs HBT’s," IEEE Transactions on Microwave Theory and Techniques, Vol. 47, 1999, pp. 1743-1746.

Kurtas, E., Proakis, J. and Salehi, M., "Reduced Complexity Maximum Likelihood Sequence Estimation for Multitrack High Density Magnetic Recording Channels," IEEE Transactions on Magnetics, Vol. 35, No. 4, 1999, pp. 2187-2193.

Marengo, E.A., Rappaport, C.M. and Miller, E.L., "Optimum PML ABC Conductivity Profile in FDFD," IEEE Trans. on Magnetics, Vol. 35, No. 3, 1999, pp. 1506-1509.

Rappaport, C., Wu, S. and Winton, S., "FDTD Wave Propagation Modeling in Dispersive Soil Using a Single Pole Conductivity Model," IEEE Transactions on Magnetics, Vol. 35, 1999, pp. 1542-1545.

Gu, Z., Rappaport, C. and Wang, P., "A 2 1/4 Turn Spiral Antenna for Catheter Cardiac Ablation," in IEEE Transactions on Biomedical Engineering, 1999, pp. 1480-1482.

Duman, T. and Salehi, M., "Performance Bounds for Turbo Coded Modulation Systems," IEEE Transactions on Communications, Vol. 47, No. 4, 1999, pp. 511-521.

Duman, T. and Salehi, M., "The Union Bound for Turbo Coded Modulation Systems Over Fading Channels," IEEE Transactions on Communications, Vol. 47, No. 10, 1999, pp. 1495-1502.

Duman, T. and Salehi, M., "Correction to the Union Bound for Turbo Coded Modulation Systems Over Fading Channels," IEEE Transactions on Communications, Vol. 47, No. 11, 1999, p. 1766.

King, R.W.P. and Sandler, S., "Author’s Reply to Remarks on the Electromagnetic Field of a Vertical Electric Dipole Over the Earth or Sea," IEEE Trans. on Antennas and Propagation, Vol. 47, No. 11, 1999, pp. 1746-1747.

Sprangle, P., Hafizi, B. and Serafim, P., "Dynamics of Short Laser Pulses Propagating in Plasma Channels," Physical Review Letters, Vol. 82, 1999, pp. 1173-1176.

Sprangle, P., Hafizi, B. and Serafim, P., "Propagation of Finite Length Laser Pulses in Plasma Channels," Physical Review E, Vol. 59, 1999, pp. 3614-3623.

Linder, S. and Shafai, B., "Qualitative Robust Fuzzy Control for the 1992 ACC Benchmark," IEEE Transactions on Fuzzy Systems, 1999, pp. 409-422.

Wilson, B.H., Eryilmaz, B. and Shafai, B., "An Adaptive Angular Sweep Algorithm for Value Set Construction," IEEE Transactions on Automatic Control, 1999, pp. 551-556.

Stankovic, A.M., Perreault, D.J. and Sato, K., "Synthesis of Dissipative Nonlinear Controllers for Series Resonant DC/DC Converters," IEEE Transactions on Power Electronics, Vol. 14(4). 1999, pp. 673-682.

Stankovic, A.M., Tadmor, G., Coric, Z. and Agirman, I., "On Torque Ripple Reduction in Current-Fed Switched Reluctance Motors," IEEE Transactions on Industrial Electronics, Vol. 46(1), 1999, pp. 177-183.

Mattavelli, P., Stankovic, A.M. and Verghese, G.C., "SSR Analysis with Dynamic Phasor Model of Thyristor-Controlled Series Capacitor," IEEE Transactions on Power Systems, Vol. 14(1), 1999, pp. 200-208.

Stankovic, A.M., Lesieutre, B.C. and Aydin, T., "Modeling and Analysis of Single-Phase Induction Machines with Dynamic Phasors," IEEE Transactions on Power Systems, Vol. 14(1), 1999, pp. 9-14.

Stankovic, A.M., Stefanov, P.C., Tadmor, G. and Sobajic, D.J., "Dissipativity as a Unifying Control Design Framework for Suppression of Low Frequency Oscillations in Power Systems," IEEE Transactions on Power Systems, Vol. 14(1), 1999, pp. 192-199.

Caliskan, V.A., Verghese, G.C. and Stankovic, A.M., "Multi-Frequency Averaging of DC/DC Converters," IEEE Transactions on Power Electronics, Vol. 14(1), 1999, pp. 124-133.

Capone, J. and Stavrakakis, I., "Delivering QoS Requirements to Traffic with Diverse Delay Tolerances in a TDMA Environment," Association for Computing Machinery (ACM) IEEE Trans. on Networking, 1999, Vol. 7, No. 1, pp. 75-87.

Santivanez, C. and Stavrakakis, I., "Study of Various TDMA Schemes for Wireless Networks in the Presence of Deadlines and Overhead," IEEE Journal on Selected Areas in Communications, Vol. 17, No. 7, 1999, pp. 1284-1304.

Capone, J. and Stavrakakis, I., "Achievable QoS in an Interference/Resource-Limited Shared Wireless Channel," IEEE Journal on Selected Areas in Communications, Vol. 17, No. 11, 1999, pp. 2041-2051.

Antoniou, Z. and Stavrakakis, I., "Scheduling Algorithms for Application-Level QoS Support of Continuous Media Stream," in European Trans. on Telecommunications, Special issue on Architectures, Protocols and Quality of Service for the Internet of the Future, No. 3, 1999.

Stojanovic, M. and Zvonar, Z., "Performance of Multiuser Diversity Reception in Rayleigh Fading CDMA Channels," IEEE Trans. On Communications, 1999.

Zavracky, P.M., McGruer, N.E. and Morrison, R.H., "Microswitches and Microrelays with a View Toward Microwave Applications," RF and Microwave Computer Aided Engineering, Vol. 9, 1999, pp. 338-347.

Zhang, X., Brady, D. and Shamai, S., "Coherent PSK Demodulation in Constant-Envelope Interference," Proceedings of the 1999 Conference on Information Sciences and Systems, Johns-Hopkins University, Baltimore, Maryland, March 1999, pp. 269-274.

Brady, D., Kocic, M., Miller, A.W. and Karger, B.L., "A Maximum-Likelihood Base Caller for DNA Sequencing," Proceedings of the 1999 Conference on Information Sciences and Systems, Johns-Hopkins University, Baltimore, Maryland, March 1999, pp. 518-523.

Sanchez, C., Koski, P., Brady, D. and Massa, D., "Sequence Position Modulation for Surf-Zone Underwater Acoustic Communications," Proceedings of the 1999 Symposium on Unmanned, Untethered Submersible Technology, Durham, New Hampshire, August 1999, pp. 270-279.

Bouchereau, F., Brady, D. and Lanzl, C., "Estimation of a Jammed Multipath Channel Delay Profile Using Superresolution Methods and a Random Path Decorrelation Technique," Proceedings of the 1999 Adaptive Sensor Array Processing Workshop, MIT Lincoln Labs, Massachusetts, March 1999, pp. 57-62.

Srinidhi, K.G., Brooks, D.H., MacLeod, R.S. and Kaeli, D.R., "Imposition of Frequency Domain Constraints in Inverse Electrocardiography," Proc. Ann. IEEE EMBS/BMES Conf., 1999, CD-ROM.

Gaudette, R.J., Boas, D.A., Brooks, D.H., DiMarzio, C.A., Kilmer, M.E. and Miller, E.L., "A Comparison of Linear Reconstruction Techniques for 3D DPDW Imaging of Absorption Coefficient," Proceedings of SPIE, Optical Tomography and Spectroscopy of Tissue III, Chance, B., Alfano, R.R. and Tromberg, B.J., (eds.), SPIE Vol. 3597, January 1999, pp. 55-66.

Brooks, D.H., Srinidhi, K.G., MacLeod, R.S. and Kaeli, D.R., "Multiply Constrained Cardiac Electrical Imaging Methods," Proceedings of the SPIE Annual Meeting, Subsurface Imaging, Subsurface Sensors and Applications, SPIE Vol. 3752, invited paper for special session on October 1999, pp. 62-71.

Tzannes, A.P. and Brooks, D.H., "Point Target Detection in IR Image Sequences Based on Target and Clutter Temporal Profile Modeling," Infrared Technology and Applications XXV, Proceedings of SPIE's 13^th Annual International Symposium on Aerospace/Defense Sensing, Simulations and Controls, SPIE Vol. 3698, 1999, pp. 482-490.

Tzannes, A.P. and Brooks, D.H., "Detection of Point Targets in Image Sequences by Hypothesis Testing: A Temporal Test First Approach," Proc. ICASSP '99, Vol. 6, 1999, pp. 3377-3380.

Buus, S., "Temporal Integration of Loudness in Listeners with Sloping Sensorineural Hearing Losses," invited paper for Proc. 25^th Annual Northeast Bioengineering Conference (IEEE), Piscataway, New Jersey, 1999, pp. 21-22.

Roth, I., Bryan, M., Liu, W., Qin, S. and Chan, C., "Plasma Immersion Ion Implantation for SOI Fabrication," Proceedings of the Electrochemical Society, 195^th Meeting, 1999, pp. 393-394.

Farrens, S., En, W.G., Malik, I., Bryan, M., Roth, I., Henley, F., Cheung, N. and Chan, C., "High Quality SOI Structures by the Genesis Process," Proceedings of the Electrochemical Society, 195^th Meeting, 1999, pp. 396-397.

Chan, C., "Applications of Plasma Immersion Ion Implantation in Microelectronics – a Review," Proceedings of the Fifth International Workshop on Plasma Based Ion Implantation, 1999, pp. IT-6.

Current, M., Liu, W., Roth, I., Lamm, A., En, W., Mali, I., Feng, L., Chan, C. and Cheung, N.C., "A Plasma Immersion Implantation Tool for Materials Modification," Proceedings of the Fifth International Workshop on Plasma Based Ion Implanatation, 1999, pp. O-02.

Ho, A., Kwok, D., Zeng, X., Chan, C. and Chung, P., "Preparation of Gallium Nitride and Related Compounds by Plasma Ion Immersion Implantation and Rapid Thermal Annealing," Proceedings of the Fifth International Workshop on Plasma Based Ion Implantation, 1999, pp. P-58.

Tsihrintzis, G.A. and Devaney, A.J., "Automatic Target Detection, Recognition, and Location Estimation from Wavefield Measurements," Proceedings of the 33^rd Annual Conference on Information Sciences and Systems, Vol. I, 1999, pp. 81-85.

Tsihrintzis, G.A. and Devaney, A.J., "Higher Order (Nonlinear) Diffraction Tomography," Proceedings of the 33^rd Annual Conference on Information Sciences and Systems, Vol. II, 1999, pp. 574-579.

Vo-Dinh, T., Alarie, J.P. and DiMarzio, C.A., "Hyperspectral Imaging Using AOTF and NIR Sensing of Buried Objects and Landmines," Industrial and Environmental Monitors and Biosensors, SPIE Vol. 3534, February 1999, pp. 321-327.

DiMarzio, C.A., McKnight, S.W. and Li, W., "Photoacoustic Techniques in Landmine Detection," Industrial and Environmental Monitors and Biosensors, SPIE Vol. 3534, February 1999, pp. 328-336.

DiMarzio, C.A., Rappaport, C.M. and Sauermann, G.O., "Microwave-Enhanced Infrared Thermography," Industrial and Environmental Monitors and Biosensors, SPIE Vol. 3534, February 1999, pp. 337-342.

Wiesenseel, R.A., Karl, W.C., Castanon, D.A. and DiMarzio, C.A., "Statistical Sensor Fusion Analysis of Near-IR Polarimetric and Thermal Imagery for the Detection of Mine-Like Targets," Industrial and Environmental Monitors and Biosensors, SPIE Vol. 3534, February 1999, pp. 343-351.

Hogenboom, D.O. and DiMarzio, C.A., "Crosswind Imaging Lidar," Industrial and Environmental Monitors and Biosensors, SPIE Vol. 3534, February 1999, pp. 354-358.

DiMarzio, C.A. and Emmitt, G.D., "Potential for Continuous Monitoring of Fugitive Dust by Lidar," Industrial and Environmental Monitors and Biosensors, SPIE Vol. 3534, February 1999, pp. 393-398.

DiMarzio, C.A., Li, W., Rappaport, C.M., Sauermann, G.O. and Scott, H.E., "Microwave-Enhanced Infrared Thermography," Presented at the SPIE Aerosense Conference, Detection and Remediation Technologies for Mines and Minelike Targets IV, SPIE Vol. 3710, Orlando, Florida, April 1999, pp. 173-179.

Li, W., DiMarzio, C.A. and Rappaport, C.M., "Model for Laser-Generated Acoustic Wave in Soil," Proceedings of SPIE, Environmental Monitoring and Remediation Technologies II, SPIE Vol. 3853, Boston, Massachusetts, September 1999, pp. 303-310.

DiMarzio, C.A., Oktar, T., Li, W. and Rappaport, C.M., "Detection of Objects Buried in Soil Using Microwave Heating," Proceedings of SPIE, Environmental Monitoring and Remediation Technologies II, SPIE Vol. 3853, Boston, Massachusetts, September 1999, pp. 311-320.

Dwyer, P.J. and DiMarzio, C.A., "Hyperspectral Imaging for Dermal Hemoglobin Spectroscopy," Subsurface Sensors and Applications, SPIE Vol. 3752, October 1999, pp. 72-82.

Gaudette, T.J., Townsend, D.J. and DiMarzio, C.A., "Interaction of Diffusive Waves and Ultrasound," Subsurface Sensors and Applications, SPIE Vol. 3752, October 1999, pp. 83-89.

Miller, G.H., Culbertson, S.C., Mobley, L., DiMarzio, C.A. and Vo-Dinh, T., "Near Infrared (NIR) Emitter/Detector Probe for Sensing Buried Objects and Landmines," Subsurface Sensors and Applications, SPIE Vol. 3752, October 1999, pp. 307-313.

Li, W., Dimarzio, C.A., McKnight, S.W., Sauermann, G.O. and Miller, E.L., "Laser-Induced Acoustic Imaging of Underground Objects," Proc. SPIE Environmental Monitoring and Remediation Technologies, Vo-Dinh, T. and Spellicy, R.L., (eds.), Vol. 3534, February 1999, pp. 328-336.

DiMarzio, C.A., Gaudette, R.J. and Gaudette, T.J., "A New Imaging Technique Combining Diffusive Photon Density Waves and Focussed Ultrasound," Optical Tomography and Spectroscopy of Tissue III, SPIE Vol. 3597, 1999, pp. 376-384.

Hogenboom, D.O., Warner, C.M., Glina, Y. and DiMarzio, C.A., "Phase Imaging of Embryos Using a Quadrature Interferometry Microscope," Three-Dimensional and Multidimensional Microscopy: Image Acquistion and Processing VI, SPIE Vol. 3605A, May 1999, pp. 101-106.

Drongowski, P., Hunter, D., Fayyazi, M., Kaeli, D. and Casmira, J., "Studying the Performance of the FX!32 Binary Translation System," Proceedings of the 1^st Workshop on Binary Translation, Newport Beach, California, October 1999, also appearing in IEEE TCCA News, December 1999, pp. 56-68.

Sair, S., Kaeli, D. and Fridman, J., "A Study of Dynamic Branch Predication for SHARC DSP’s," Proceedings of the 2^nd International Workshop on Compiler and Architecture Support for Embedded Systems (CASES’99), Washington, D.C., October 1999, pp. 63-67.

Sair, S., Olivadoti, G., Kaeli, D., Meleis, W.M. and Fridman, J., "DSPTune, A Performance Evaluation Toolset for the SHARC DSP," Proceedings of SHARC’99, Herefordshire, England, November 1999, pp. 237-244.

Gao, H., Kokar, M.M. and Weyman, J., "An Approach to Automation of Fusion Using Specware," Proceedings of the Second International Conference on Information Fusion (Fusion’99), Vol. I, 1999, pp. 109-116.

DeLoach, S.A. and Kokar, M.M., "Category Theory Approach to Fusion of Wavelet-Based Features," Proceedings of the Second International Conference on Information Fusion (Fusion’99), Vol. I, 1999, pp. 117-124.

Li, J., Kokar, M.M. and Weyman, J., "Incorporating Uncertainty into the Formal Development of the Fusion Operator," Proceedings of the Second International Conference on Information Fusion (Fusion’99), Vol. I, 1999, pp. 125-132.

Kokar, M.M., Tomasik, J.A. and Weyman, J., "A Formal Approach to Information Fusion," Proceedings of the Second International Conference on Information Fusion (Fusion’99), Vol. I, 1999, pp. 133-140.

Tomasik, J.A. and Kokar, M.M., "Towards a Goal-Driven Autonomous Fusion System," Proceedings of the Second International Conference on Information Fusion (Fusion’99), Vol. I, 1999, pp. 149-153.

Smith, J., Kokar, M.M. and Baclawski, K., "Formal Verification of UML Diagrams: A First Step Towards Code Generation," Eighth OOPSLA Workshop on Behavioral Semantics, 1999, pp. 206-220.

Leeser, M. and Matulis, K., "Adaptive Motor Control with Reconfigurable Logic," Reconfigurable Technology: FPGAs for Computing and Applications, Proceedings of SPIE, Vol. 3844, 1999, pp. 122-128.

Lehman, B. and Weibel, S., "Partial Averaging of Functional Differential Equations," Proceedings of the IEEE Conference on Decision and Control, 1999, pp. 4684-4689.

Sun, C., Lehman, B. and Ciprian, R., "Dynamic Modeling and Control in Average Current Mode Controlled PWM DC/DC Converters," Proceedings of the IEEE Power Electronics Specialist Conference, 1999, Vol. 2, pp. 1152-1158.

Vaidyanathan, C., Kettle, P., Moynihan, F.P. and Lehman, B., "Highly Flexible Motor Control Possible for the Appliance Market," European Conference on Power Electronics, 1999, CD-ROM.

Sun, C. and Lehman, B., "Modeling of Average Current Mode Controlled in PWM DC/DC Converters," Proceedings of the 14^th World Congress of International Federation of Automatic Control, Beijing, P.R. China, Vol. O, 1999, pp. 7-c-054.

Yu, Y., Xu, J., Huang, W.K. and Lombardi, F., "Minimizing the Number of Programming Steps for Diagnosis of Interconnect Faults in FPGAs," Proc. 8^th IEEE Asian Test Symposium, Shanghai, P.R. China, November 1999, pp. 357-362.

Lombardi, F., Zhao, L. and Walker, D.M.H., "Iddq Testing of Input/Output Resources of SRAM-Based FPGAs," Proc. 8^th IEEE Asian Test Symposium, Shanghai, P.R. China, November 1999, pp. 375-380.

Park, N. and Lombardi, F., "Stratified Testing of MulitChip Module Systems Under Uneven Known-Good-Yield," Proc. IEEE Int. Symposium On Defect and Fault Tolerance in VLSI Systems, Albuquerque, New Mexico, October 1999, pp. 192-200.

Lombardi, F., Meyer, F.J. and Feng, W., "A Novel BIST TPG Method for Interconnect Testing Using the IEEE 1149.1 STD," Proc. IEEE Asian Test Conference, Shanghai, P.R. China, November 1999, pp. 95-100.

Lombardi, F., Meyer, F.J. and Feng, W., "Adaptive Algorithms for Maximal Diagnosis of Wiring Interconnects," Proc. IEEE FTCS, Madison, Wisconsin, June 1999, pp. 130-137.

Lombardi, F., Yu, Y., Xu, J. and Huang, W.K., "Diagnosis Single Faults for Interconnects in SRAM Based FTPGAs," Proc. IEEE ASP DAC, Hong Kong, January 1999, pp. 283-286.

Lombardi, F. and Park, N., "On the Defect Level of Multichip Module Systems with Repair at Assembly," 8^th Annual NASA Symposium on VLSI Design, Albuquerque, New Mexico, October 1999, pp. 7-1-1;7-1-11.

Bonk, J., Stone, A. and Manolakos, E.S., "Synthesis of Array Architectures of Block Matching Motion Estimation: Design Exploration Using the Tool DG2VHDL," in the Proceedings of the IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP), 1999, pp. 1925-1928.

McGruer, N.E., Zavracky, P.M., Morrison, R., Majumder, S., Potter, D. and Schirmer, M., "RF and Current Handling Performance of Electrostatically Actuated Microswitches," Proceedings of Sensors Expo ’99, September 1999, I-X Convention Center, Cleveland, Ohio, 1999, pp. 123-127.

Truong, T.Q., Barnes, T.G., Lu, X., Adams, G.G. and McGruer, N.E., "Design Analysis, Fabrication, and Testing of a MEMS Contact/Bending Sensor with Improved Dynamic Range," Micro-Electro-Mechanical Systems, 1999 ASME International Congress and Exposition, MEMS Vol. 1, 1999, pp. 201-208.

Barnes, T.G., Truong, T.Q., Lu, X., McGruer, N.E. and Adams, G.G., "Design, Analysis, Fabrication, and Testing of a MEMS Flow Sensor," Micro-Electro-Mechanical Systems, 1999 ASME International Congress and Exposition, MEMS Vol. 1, 1999, pp. 355-361.

McKnight, S.W., Li, W. and DiMarzio, C.A., "Imaging of Buried Objects by Laser-Induced Acoustic Detection," SPIE Transactions on Detection of Mines and Mine-Like Objects, Vol. 3710, 1999, pp. 231-238.

McKnight, S.W., Li, W. and DiMarzio, C.A., "Laser-Induced Acoustic Detection of Buried Objects," Presented at AeroSense, Detection and Remediation Technologies for Mines and Minelike Targets IV, SPIE Vol. 3710, Orlando, Florida, April 1999, pp. 231-238.

Witten, A.J., McKnight, S.W., DiMarzio, C.A. and Li, W., "Imaging and Detection of Mines from Acoustic Measurements," Presented at AeroSense, Detection and Remediation Technologies for Mines and Minelike Targets IV, SPIE Vol. 3710, Orlando, Florida, April 1999, pp. 1385-1395.

Li, W., McKnight, S.W., DiMarzio, C.A. and Roy, R., "Laser-Induced Acoustic Detection of Shallow-Buried Objects," Subsurface Sensors and Applications, SPIE Vol. 3752, October 1999, pp. 285-291.

Eichenberger, A. and Meleis, W.M., "Balance Scheduling: Weighing Branch Tradeoffs in Superblocks," 32^nd Annual Intl. Conference on Microarchitecture (IEEE/ACM), Haifa, Israel, November 1999, pp. 272-283.

Baev, I.D., Meleis, W.M. and Eichenberger, A., "Algorithms for Total Weighted Completion Time Scheduling," Proc. of the ACM-SIAM Symposium on Discrete Algorithms, Baltimore, Maryland, January 1999, pp. 852-853.

Meleis, W.M. and Davidson, E.S., "Optimal Dual-Issue Instruction Scheduling with Spills for Binary Expression Trees," Proc. of the ACM-SIAM Symposium on Discrete Algorithms, Baltimore, Maryland, January 1999, pp. 678-686.

Zhao, J., Meyer, F.J. and Lombardi, F., "Maximal Diagnosis of Interconnects of Random Access Memories," 17^th IEEE VLSI Test Symposium, Dana Point, California, April 1999, pp. 378-383.

Zhao, J., Meyer, F.J. and Lombardi, F., "Diagnosing Interconnects of Random Access Memories," Proc. 8^th North Atlantic Test Workshop, West Greenwich, Rhode Island, May 1999, pp. 56-61.

Feng, W.-Y., Meyer, F.J. and Lombardi, F., "Two-Step Algorithms for Maximal Diagnosis of Wiring Interconnects," 29^th IEEE Fault-Tolerant Computing Symposium, June 1999, pp. 130-137.

Zhao, J., Meyer, F.J. and Lombardi, F., "Interconnect Diagnosis of Bus-Connected Multi-RAM Systems," Proc. IEEE International Workshop on Memory Technology, Design, and Testing, San Jose, California, August 1999, pp. 40-47.

Feng, W.-Y., Meyer, F.J. and Lombardi, F., "Novel Control Pattern Generators for Interconnect Testing with Boundary Scan," 1999 IEEE Symposium on Defect and Fault Tolerance in VLSI Systems, Albuquerque, New Mexico, November 1999, pp. 112-120.

Meyer, F.J., Lombardi, F. and Zhao, J., "Good Processor Identification in Two-Dimensional Grids," 1999 IEEE Symposium on Defect and Fault Tolerance in VLSI Systems, Albuquerque, New Mexico, November 1999, pp. 348-356.

Feng, W.-Y., Chen, X.-T., Meyer, F.J. and Lombardi, F., "Reconfiguration of One-Time Programmable FPGAs with Faulty Logic Resources," 1999 IEEE Symposium on Defect and Fault Tolerance in VLSI Systems, Albuquerque, New Mexico, November 1999, pp. 368-376.

Feng, W.-Y., Huang, W.K., Meyer, F.J. and Lombardi, F., "A BIST TPG Approach for Interconnect Testing with the IEEE 1149.1 STD," Proceeding of the 8^th Asian Test Symposium, Shanghai, P.R. China, November 1999, pp. 95-100.

Kilmer, M.E., Miller, E.L., Boas, D.A., Brooks, D.H., DiMarzio, C.A. and Gaudette, R.J., "Direct Object Localization and Characterization from Diffuse Photon Density Wave Data," Proceedings of SPIE, Optical Tomography and Spectroscopy of Tissue III, Chance, B., Alfano, R.R. and Tromberg, B.J., (eds.), Vol. 3597, January 1999, pp. 45-54.

Miller, E.L. and Kilmer, M., "Statistical Methods for Shape-Based Inverse Scattering," invited talk, Proceedings of the 1999 IEEE Information Theory Workshop on Detection, Estimation, Classification, and Imaging, Santa Fe, New Mexico, February 1999, p. 17.

Ozdemir, M., Miller, E.L. and Norton, S.J., "Localization and Characterization of Buried Objects from Multi-Frequency, Array Inductive Data," Proceedings of SPIE AeroSense Symposium, Detection and Remediation Technologies for Mines and Minelike Targets IV, Dubey, A.C., Harvey, J.F., Broach, J.T. and Dugan, R.E., (eds.), Vol. 3710, Orlando, Florida, April 1999, pp. 26-36.

Xu, X., Miller, E.L. and Rappaport, C.M., "Statistically Based Sequential Detection of Buried Mines from Array Ground-Penetrating Radar Data," Proceedings of SPIE AeroSense Symposium, Detection and Remediation Technologies for Mines and Minelike Targets IV, Dubey, A.C., Harvey, J.F., Broach, J.T. and Dugan, R.E., (eds.), Vol. 3710, Orlando, Florida, April 1999, pp. 1063-1074.

Weisenseel, R.A., Karl, W.C., Castanon, D.A., Miller, E.L., Rappaport, C.M. and DiMarzio, C.A., "Statistical Fusion of GPR and EMI Data," Proceedings of SPIE AeroSense Symposium, Detection and Remediation Technologies for Mines and Minelike Targets IV, Dubey, A.C., Harvey, J.F., Broach, J.T. and Dugan, R.E., (eds.), SPIE Vol. 3710, Orlando, Florida, April 1999, pp. 1179-1187.

Shi, P. and Miller, E.L., "Baseband Wiener Filter Processing for Mine Detection from Scanned Laser Induced Acoustic Data," Proceedings of SPIE AeroSense Symposium, Detection and Remediation Technologies for Mines and Minelike Targets IV, Dubey, A.C., Harvey, J.F., Broach, J.T. and Dugan, R.E., (eds.), Vol. 3710, Orlando, Florida, April 1999, pp. 1373-1384.

Oliver, S.A., How, H., Shi, P., Hu, W., Chen, M.L., Kozulin, I., McGruer, N.E., Zavracky, P.M. and Vittoria, C., "Fabrication of Integrated Ferrite/Semiconductor Circulators," Proceedings of the III-V and IV-IV Materials Processing and Challenges for Highly Integrated Microelectronics and Optoelectronics, Materials Research Society Symposium, Vol. 535, 1999, pp. 159-164.

Garlapati, A. and Prasad, S., "Large Signal Characterization of Heterojunction Bipolar Transistors," Proceedings of the 10^th Microcoll, Hungarian Academy of Sciences, Budapest, Hungary, 1999, pp. 181-189.

Vai, M. and Prasad, S., "Application of Neural Networks Optimized by the Genetic Algorithm to Microwave Systems," IEEE Antennas and Propagation Society (AP-S)/International Symposium Digest, Orlando, Florida, Vol. 4, 1999, pp. 2580-2583.

Garlapati, A. and Prasad, S., "Large Signal Characterization of HBT’s for Microwave Application Including Self-Heating Effects," Proceedings of the 29^th European Microwave Conference, Munich, Germany, Vol. 2, 1999, pp. 121-124.

Garlapati, A. and Prasad, S., "Large Signal Characterization of Heterojunction Bipolar Transistors," Proceedings of the 4^th International Conference on Telecommunications and Modern Satellite, Cable and Broadcasting Devices, TELSIKS 99, Nis, Yugoslavia, Vol. 2, 1999, pp. 378-381.

Garlapati, A. and Prasad, S., "Modelling of Multifinger InGaAs/GaAs Heterojunction Bipolar Transistors Including Self-Heating Effects," Proceedings of the 7^th International Symposium on Recent Advances in Microwave Technology, ISRAMT 99, Malaga, Spain, 1999, pp. 306-310.

Garlapati, A. and Prasad, S., "Large Signal Modelling of Multifinger HBT’s for Microwave Applications Based on a Genetic Algorithm," Proceedings of the 10^th International Workshop on the Physics of Semiconductor Devices, Kumar, V. and Agarwal, S.K., (eds.) Allied Publishers, New Delhi, India, Vol. 1, 1999, pp. 536-541.

Proakis, J.G. and Mahadevappa, R., "Incremental Quantization - A New Multiuser Detection Algorithm for CDMA Systems," Proc. of the 33^rd Annual Conf. on Information Sciences and Systems (CISS'99), Baltimore, Maryland, March 1999, Vol. 1, pp. 446-451.

Sozer, E.M., Proakis, J.G., Stojanovic, M., Benson, A. and Hatch, M., "Direct Sequence Spread Spectrum Based Modem for Underwater Acoustic Communications and Channel Measurement," OCEANS'99 Conf., Seattle, Washington, September 1999.

Proakis, J.G. and Bjerke, B.A., "Multiple Antenna Diversity Techniques for Transmission over Fading Channels," Wireless Communications and Networking Conf. (WCNC'99), New Orleans, Louisiana, September 1999.

Proakis, J.G., Kalofonos, D.N. and Kurtas, E., "Performance Comparisons of Concatenated Codes with Iterative Decoding for DS-CDMA Systems with Application to IS-95-Based Systems," Wireless Communications and Networking Conf. (WCNC'99), New Orleans, Louisiana, September 1999.

Kalofonos, D.N., Kurtas, E. and Proakis, J.G., "Performance of Multi-Code CDMA Systems with Concatenated Coding and Iterative Decoding in Multipath Rayleigh Fading Channels," in Proc. of the IEEE Vehicular Technology (VTC'99) Conf., Amsterdam, The Netherlands, September 1999, pp. 1566-2570.

Raemer, H.R., Rappaport, C.M. and Miller, E.L., "Near-Field and Timing Effects in Simulation of Focused Array Radar Signals from a Mine in Subsurface Clutter," Proceedings of SPIE Aerosense Conference, Detection and Remediation Technologies for Mines and Minelike Targets IV, Orlando, Florida, April 1999, pp. 1289-1300.

Raemer, H.R., Rappaport, C. and Miller, E.L., "Surface Roughness Effects in Simulation of Mine Signals Using a Focused Array GPR System," Proceedings of SPIE 44^th Annual Meeting and Exhibition, Denver, Colorado, July 1999, pp. 333-346.

Rappaport, C., Winton, S., Jin, D. and Siegle, L., "Modeling the Effects of Non-Uniform Soil Moisture on Detection Efficacy of Mine-Like Objects with GPR," Proceedings of SPIE Aerosense Conference, Detection and Remediation Technologies for Mines and Minelike Targets IV, Dubey, A.C., Harvey, J.F., Broach, J.T. and Dugan, R.E., (eds.), Orlando, Florida, April 1999, pp. 979-990.

Rappaport, C., Wu, S., Kilmer, M. and Miller, E.L., "Distinguishing Shape Details of Buried Non-Metallic Mine-Like Objects with GPR," Proceedings of SPIE Aerosense Conference, Detection and Remediation Technologies for Mines and Minelike Targets IV, Dubey, A.C., Harvey, J.F., Broach, J.T. and Dugan, R.E., (eds.), Orlando, Florida, April 1999, pp. 1419-1428.

Rappaport, C. and Miller, E.L., "Physics-Based Modeling and Inverse Scattering for Detection of Buried Mine-Shape Anomalies," Proceedings of SPIE 44^th Annual Meeting and Exhibition, Denver, Colorado, July 1999, pp. 274-285.

Duman, T. and Salehi, M., "Performance Bounds for Turbo Coded Modulation Systems," Proceedings of the Sixth Canadian Workshop on Information Theory, Kingston, Ontario, Canada, June 1999, pp. 21-24.

Duman, T. and Salehi, M., "The Union Bound for Turbo Coded Modulation Systems Over Fading Channels," Proceedings of the 1999 Globecom Conference, Rio de Janiero, Brazil, November 1999, pp. 520-524.

Shafai, B., Uddin, V., Wilson, B. and Chen, J., "A Structurally Constrained LMI Approach to Maximizing the Real Stability Radius by State Feedback," Proceedings of American Control Conference, San Diego, California, 1999, pp. 1886-1888.

Bas, O.Y., Ho, M., Shafai, B. and Linder, S., "Improving Stability of EKF Used by the Symmetrical Measurement Equations," Proceedings of 44^th International Symposium on Optical Science, Engineering, and Instrumentation (SPIE), Denver, Colorado, 1999, pp. 3809-3826.

Linder, S., Shafai, B. and Bas, O.Y., "Improving Track Maintenance of Crossing and Maneuvering Targets," Proceedings of AIAA’s Guidance and Control Conference, Portland, Oregon, 1999, pp. 1752-1760.

Bas, O.Y., Shafai, B. and Linder, S., "Design of Optimal Gains for the Proportional Integral Kalman Filter with Application to Single Particle Tracking," Proceedings of 38^th IEEE Conference on Decision and Control, Phoenix, Arizona, 1999, pp. 4567-4572.

Uddin, V., Shafai, B. and Kawaji, S., "A Simple Method for the Design of Minimal-Order Multi-Functional Observer," Proceedings of the Second IASTED International Conference on Control and Applications, Banff, Alberta, Canada, 1999, pp. 107-112.

Silevitch, M.B., McKnight, S.W. and Rappaport, C.M., "A Common Framework of Subsurface Sensing and Imaging," Proc. of SPIE, Subsurface Sensors and Applications, Vol. 3752, 1999, pp. 2-9.

Mattavelli, P. and Stankovic, A.M., "Energy-Based Compensation Strategy for Active Filters," IEEE Conference on Decision and Control, December 1999, pp. 4656-4661.

Petrovic, V., Ortega, R. and Stankovic, A.M., "A Globally Convergent Energy-Based Controller for PM Synchronous Motors," IEEE Conference on Decision and Control, December 1999, pp. 334-340.

Carrasco, J.M., Escobar, G., Galvan, E., Ortega, R. and Stankovic, A.M., "Adaptive Controllers for the Series Resonant Converter: An Experimental Comparative Study," Annual Meeting of the IEEE Industrial Electronics Society - IECON'99, November 1999, pp. 373-378.

Stankovic, A.M., "A Frequency-Domain Interpretation of Notions of Reactive Power in Periodic Polyphase Circuits," North American Power Symposium, October 1999, pp. 424-430.

Mattavelli, P. and Stankovic, A.M., "A Dissipativity-Based Control Strategy for STATCOMs," IEEE Powertech Conference, Budapest, Hungary, September 1999, CD-ROM.

Stankovic, A.M., "Dynamic Phasors in Modeling of Arcing Faults on Overhead Lines," International Conference on Power System Transients, June 1999, pp. 510-514.

Agirman, I., Stankovic, A.M. and Tadmor, G., "Adaptive Torque Ripple Minimization in Switched Reluctance Motors Using Observer-Based Backstepping," IEEE Power Electronics Specialists Conference, June 1999, pp. 820-825.

Mattavelli, P. and Stankovic, A.M., "Dynamical Phasors in Modeling and Control of Active Filters," IEEE International Symposium on Circuits and Systems, May 1999, Vol. 5, pp. 278-282.

Tadmor, G., "Dissipative Design and The Nonlinear TORA Benchmark Example, Revisited," IEEE Conference on Decision & Control, December 1999, pp. 1182-1187.

Nieva, P.M., Zavracky, P.M., Adams, G.G., Tada, H., Abramson, A.R., Miaoulis, I.N. and Wong, P.Y., "Temperature Measurement During Rapid Thermal Annealing Using MEMS," Proceedings of the 5^th ASME/JSME Joint Thermal Engineering Conference, 1999, CD-ROM: AJTE99/6196.

Rensing, N.M., Dodson, S., Adams, G.G., Zavracky, P.M., McClelland, R.W. and Lemoncelli, A., "Modeling, Simulation, and Testing of the Nonlinear Oscillations of a MEMS Torsional Mirror with Mechanical-Electrostatic Coupling," Micro-Electro-Mechanical Systems, 1999 ASME International Congress and Exposition, MEMS Vol. 1, 1999, pp. 143-150.

Müsch, H., Buus, S. and Florentine, M., The Ear as an Information Receiver, Acoustical Society of America, 1999. (Translation of Das Ohr als Nachrichtenempfänger by Zwicker, E. and Feldtkeller, R., Hirzel, Stuttgart, 1967.)

Buus, S., "Loudness Functions Derived from Measurements of Temporal and Spectral Integration," in Auditory Models and Non-Linear Hearing Instruments, Rasmussen, A.N., Osterhammel, P.A., Andersen, T. and Poulsen, T., (eds.), GN ReSound, Tåstrup, Denmark, 1999, pp. 135-188.

Chan, C., editor, The proceedings of the 1998 International Conference on Crossed Field Devices and Applications, 1999.

Hopwood, J., editor, Ionized Physical Vapor Deposition, Academic Press, 1999, ISBN 0-12-533027-8.

Hopwood, J., "The Role of Ionized Physical Vapor Deposition in Integrated Circuit Fabrication," in Ionized Physical Vapor Deposition, Academic Press, 1999, pp. 1-7.

Hopwood, J., "Plasma Physics," in Ionized Physical Vapor Deposition, Academic Press, 1999, pp. 181-207.

Ingle, V.K. and Proakis, J.G., "Digital Signal Processing Using Matlab-5," Brooks-Cole Publishing (ITP), Pacific Grove, 1999.

Manolakis, D.G., Ingle, V.K. and Kogon, S., "Statistical and Adaptive Signal Processing - Spectral Estimation, Signal Modeling, Adaptive Filtering, and Array Processing," McGraw-Hill, New York, 1999.

Kalamatianos, J., Chaiken, R. and Kaeli, D., "Parameter Value Characterization of Windows NT-Based Applications," in Workload Characterization: Methodology and Case Studies, John, L., (ed.), IEEE Computer Society, 1999, pp. 142-149.

Kaeli D., "Microprogramming," in The Wiley Encyclopedia of Electrical and Electronics Engineering, John Webster, (ed.), John Wiley and Sons, Vol. 13, 1999, pp. 1-9.

Baclawski, K., DeLoach, S.A., Kokar, M.M. and Smith, J., "Object-Oriented Transformation," in Behavioral Specifications of Businesses and Systems, Kilov, H., Rumpe, B. and Simmonds, I., (eds.), Kluwer Academic Publishers, Boston/Dodrecht/London, 1999, pp. 1-14.

Lehman, B., Weibel, S. and Baillieul, J., "Open-Loop Oscillatory Control," in The Wiley Encyclopedia of Electrical and Electronics Engineering, Vol. 15, Webster, J., (ed.), John Wiley & Sons, USA, 1999, pp. 150-166.

Galatopoullos, D. and Manolakos, E.S., "Developing Parallel Applications Using the JavaPorts Environment," Parallel and Distributed Processing, Rolim, J., (ed.), Lecture Notes in Computer Science, Elsevier Publ., Vol. 1586, 1999, pp. 813-828.

Proakis, J. and Salehi, M., Contemporary Communication Systems Using MATLAB, PWS Publishing Co., 1999.

Tadmor, G., "Comments on Dissipative Designs and the TORA Benchmark," in Advances in System Theory, Djaferis, T., (ed.), Kluwer, 1999, pp. 405-417.

DiMarzio, C.A., Devaney, A.J. and Lindberg, S.C., "Optical Quadrature Interferometry Utilizing Polarizing Optics," U.S. Patent No. 5,883,717, March 16, 1999.

DiMarzio, C.A., Oliver, S.A. and McKnight, S.W., "Apparatus and Method for Measuring Instantaneous Power Using a Magneto-Optic Kerr Effect Sensor," U.S. Patent No. 5,994,898, November 30, 1999.

Hopwood, J., "Monolithic Miniaturized Inductively Coupled Plasma Source," U.S. Patent No. 5,942,855, August 24, 1999.

Calder, B., Hashemi, A. and Kaeli, D., "Memory Architecture Dependent Program Mapping," filed jointly with Digital Equipment Corporation, U.S. Patent No. 5,963,972, October 5, 1999.

Oliver, S.A., Zavracky, P.M., McGruer, N.E. and Vittoria, C., "Integrated Complex-Transition Metal Oxide Device and a Method of Fabricating Such a Device," Taiwan Patent #98,524, March 24, 1999.

Tadmor, G. and Stankovic, A.M., "Dissipativity-Based Controller for Synchronous Electric Drives and Associated Methods," U.S. Patent No. 5,998,957, December 7, 1999.

Karger, B.L., Foret, F., Zavracky, P.M., McGruer, N.E., Xue, Q. and Dunayevskiy, Y.M., "Microscale Fluid Handling System," U.S. Patent No. 5,872,010, February 16, 1999.

Hoge, W.S., Brooks, D.H., Lev-Ari, H., Karl, W.C., Panych, L.P. and Miller, E.L., "Efficient Region of Interest Approximation for MR Image Acquisition," Proc. Int. Soc. of Magn. Reson. Med., Philadelphia, Pennsylvania, 1999, p. 1644.

Gaudette, R.J, Brooks, D.H., DiMarzio, C.A. and Boas, D.A., "Multi-Wavelength Diffuse Optical Imaging: Experimental Results," Presented at Baltimore, Maryland, May 1999, with a summary published in Conference on Lasers and Electro-Optics (CLEO/US), 1999 OSA Technical Digest Series, Optical Society of America, Washington, D.C.

Florentine, M., Hunter, W. and Buus, S., "Can People Become Addicted to Loud-Music Listening?" Spectrum 16, Suppl. 1, p. 26.

Buus, S., Hicks, M. and Florentine, M., "Psychometric Functions for Detection of Simple and Complex Stimuli: Effects of Duration and Component Phase," Proc. of the 22^nd Mid-Winter Meeting of the Association of Research in Otolaryngology, 1999, p. 97.

Buus, S., Florentine, M., Poulsen, T. and Müsch, H., "On the Relation Between Peripheral Compression and the Growth of Loudness," invited paper, Journal of the Acoustical Society of America, Vol. 105, 1999, p. 1022.

Vo-Dinh, T., Miller, G.H., Mobley, J., Cullum, B.M. and DiMarzio, C.A., "Development of Methods and Instrumentation for Spectral Imaging," Industrial and Environmental Monitors and Biosensors II, SPIE Vol. 3853, Boston, Massachusetts, September 1999, p. 416.

Tao, K., Mao, D. and Hopwood, J., "Modeling and Experimental Characterization of a Ti/Nitrogen/Ar Ionized Physical Vapor Deposition Tool," 46^th International Symposium of the American Vacuum Society, Seattle, Washington, October 25-29, 1999, Session PS-MoP11, Conference Abstracts, p. 48.

Yin, Y. and Hopwood, J., "Scaling and Microfabricating a Low-Pressure Inductively Coupled Plasma Source," 46^th International Symposium of the American Vacuum Society, Seattle, Washington, October 25-29, 1999, Session MM+VT-ThA6, Conference Abstracts, p. 198.

Majumder, S., McGruer, N.E., Adams, G.G., Zavracky, P.M., Morrison, R.H. and Krim, J., "Adhesion Properties of Gold-on-Gold Microswitch Contacts," American Vacuum Society, 46^th Annual Symposium Abstracts, 1999, p. 141.

Miller, E.L., "Frequency Recursive Layer Stripping Methods for Photothermal Depth Profilometry Problems," invited talk at Gordon Conference on Photoacoustic and Photothermal Phenomena, Colby-Sawyer College, New London, New Hampshire, June 27-July 2, 1999.

Mulukutla, S., "A Listing of Continuing Education Courses in Electric Power Engineering," IEEE/PES Subcommittee Report, Published as a Transaction Paper in IEEE/PES.

Rappaport, C., Wang, P., Gu, Z. and VanderBrink, B., "Wide-Aperture Microwave Catheter-Based Cardiac Ablation," Proceedings of 21^st Annual International Conference of IEEE Engineering in Medicine and Biology Society, Atlanta, Georgia, October 1999, p. 59, and Proceedings of the First Joint BMES/EMBS Conference, Atlanta, Georgia, October 1999, p. 314.

Rappaport, C., "Finding Mines by Using our Minds, High Tech Detection of Buried Land Mines," Northeastern University Magazine, March 1999, pp. 47-48.

Adams, G.G., "Dynamic Motion of Two Elastic Half-Spaces in Relative Sliding Without Slipping," ASME Journal of Tribology, Vol. 121, 1999, pp. 455-461.

Phylactopoulos, A. and Adams, G.G., "Transverse Vibration of a Rectangularly Orthotropic Spinning Disk - Part I: Formulation and Free Vibration," ASME Journal of Vibration and Acoustics, Vol. 121, 1999, pp. 273-279.

Phylactopoulos, A. and Adams, G.G., "Transverse Vibration of a Rectangularly Orthotropic Spinning Disk - Part II: Forced Vibration and Critical Speeds," ASME Journal of Vibration and Acoustics, Vol. 121, 1999, pp. 280-285.

Ando, T., Chun, J.-H. and Blue, C.A., "Uniform Droplets Benefit Advanced Particulates," Metal Powder Report, Vol. 54, No. 3, 1999, pp. 30-34.

Benneyan, J.C., "Some Control Chart Caveats," Infection Control and Hospital Epidemiology, Vol. 20, No. 8, 1999, pp. 526-527.

Fard, N. and Lee, T.H., "Cutset Enumeration of Network Systems with Link and Node Failures," Reliability Engineering and System Safety, Vol. 65, 1999, pp. 141-146.

Kavusturucu, A. and Gupta, S.M., "Manufacturing Systems with Machine Vacations, Arbitrary Topology and Finite Buffers," International Journal of Production Economics, Vol. 58, No. 1, 1999, pp. 1-15.

Gupta, S.M., Flapper, S.D.P. and Viera, L., "Guest Editors' Introduction, Special issue on the Operational Aspects of Environmentally Conscious Manufacturing," Computers and Industrial Engineering, Vol. 36(4), 1999, pp. 719-721.

Gupta, S.M., "Guest Editor's Introduction, Special issue on the Environmental, Recycling and End of Life Issues in the Electronics Industry," Journal of Electronics Manufacturing, Vol. 9(1), 1999, pp. 3-4.

Moore, K. and Gupta, S.M., "Stochastic Colored Petri Net (SCPN) Models of Traditional and Flexible Kanban Systems," International Journal of Production Research, Vol. 37, No. 9, 1999, pp. 2135-2158.

Gupta, S.M., Al-Turki, Y.A.Y. and Perry, R.F., "Flexible Kanban System," International Journal of Operations and Production Management, Vol. 19, No. 10, 1999, pp. 1065-1093.

Kavusturucu, A. and Gupta, S.M., "Expansion Method for the Throughput Analysis of Open Finite Manufacturing/Queueing Networks with N-Policy," Computers and Operations Research, Vol. 26, No. 13, 1999, pp. 1267-1292.

Kavusturucu, A. and Gupta, S.M., "Analysis of Manufacturing Flow Lines with Unreliable Machines," International Journal of Computers Integrated Manufacturing, Vol. 12, No. 6, 1999, pp. 510-524.

Gupta, S.M., "N-Policy Queueing System with Finite Source and Warm Spares," Opsearch, Vol. 36, No. 3, 1999, pp. 189-217.

Gungor, A. and Gupta, S.M., "Issues in Environmentally Conscious Manufacturing and Product Recovery: A Survey," Computers and Industrial Engineering, Vol. 36, No. 4, 1999, pp. 811-853.

Veerakamolmal, P. and Gupta, S.M., "Analysis of Design Efficiency for the Disassembly of Modular Electronic Products," Journal of Electronics Manufacturing, Vol. 9. No. 1, 1999, pp. 79-95.

Gupta, S.M., Review for "Green Electronics/Green Bottom Line: Environmentally Responsible Engineering," Goldberg, L., (ed.), Butterworth-Heinemann; (Newnes), ISBN: 0-7506-9993-0, Journal of Electronics Manufacturing, Vol. 9, No. 1, 1999, pp. 97-98.

Mak, R., Lam, K. and Gupta, S.M., "A Practical Algorithm for Cyclic Hoist Scheduling in a PCB Manufacturing Facility," Journal of Electronics Manufacturing, Vol. 8, No. 3-4, 1998, pp. 193-207. (Note: this paper was accepted in February 1999 by the journal but was back-logged by publisher to a 1998 date).

Ilegbusi, O.J., Yang, J., Mason, R. and Cornie, J.A., "Numerical and Experimental Study of Solidification Phenomena in Pressure-Infiltrated Metal Matrix Composite Casting," Journal of Composite Materials, Vol. 33:14, 1999, pp. 1276-1287.

Ilegbusi, O.J. and Quach, K., "Fractionation and Mold Filling of Semi-Solid Slurries Under Isothermal Conditions," Journal of Materials Engineering and Performance, Vol. 8, 1999, pp. 31-34.

Ilegbusi, O.J., Yang, J., Lewis, D. and Oran, E., "A Mesoscopic Numerical Modeling of the Reaction-Bonded SiC Process," Composite Part A, Vol. 30, 1999, pp. 339-348.

Ilegbusi, O.J., Hu, Z., Nesto, R., Waxman, S., Cyganski, D., Kilian, J., Stone, P.H. and Feldman, C.F., "Determination of Blood Flow and Endothelial Shear Stress in Human Coronary Artery in Vivo," The Journal of Invasive Cardiology, Vol. 11:11, 1999, pp. 667-674.

Nadler, J.H., Isaacs, J.A. and Kowalski, G.J., "Correlation of Thermal Models with Microstructural Effects in Continuous MMC Wire Production," Mat. Sci. Eng., Vol. A266, 1999, pp. 52-61.

Williams, M.G., Isaacs, J.A., Nadler, J.H., Sampson, S.L., Kowalski, G.J. and Blucher, J.T., "Analytically Motivated Process Improvements in Continuous Metal-Matrix Composite Wire Fabrication," Mat. Sci. Eng. Vol. A266, 1999, pp. 86-92.

Geffen, C.A. and Isaacs, J.A., "Economic and Environmental Tradeoffs in New Automotive Painting Technologies," SAE Transactions: Journal of Materials and Manufacturing, Vol. 107, Section 5, 1998 (published in 1999), pp. 945-952.

Pittner, S. and Kamarthi, S.V., "Feature Extraction from Wavelet Coefficients for Pattern Recognition Tasks," IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 21, No.1, 1999, pp. 83-88.

Kamarthi, S.V. and Pittner, S., "Accelerating Neural Network Training Using Weight Extrapolations," Neural Networks, Vol. 12, 1999, pp. 1285-1299.

Levendis, Y.A., Atal, A. and Carlson, J., "On the Correlation of CO and PAH Emissions from the Combustion of Pulverized Coal and Waste Tires," Environmental Science and Technology, Vol. 32, 1998 (accepted in 1999 but journal back-logged by the publisher to a 1998 date), pp. 3767-3777.

Larsen, C. and Levendis, Y.A., "Filtration Assessment and Thermal Effects on Aerodynamic Regeneration in Silicon Carbide and Cordierite Particulate Filters," Society of Automotive Engineers, SAE publication 1999-01-0466, Vol. SP-1414, 1999.

Larsen, C. and Levendis, Y.A., "Use of Ozone-Enriched Air for Diesel Particulate Trap Regeneration," Society of Automotive Engineers, SAE publication 1999-01-0114, Vol. SP-1414, 1999.

Melachrinoudis, E. and Min, H., "A Stochastic, Dynamic, Multiobjective Model for Siting Manufacturing Plants Abroad," Advances in Mathematical Programming and Financial Planning, Vol. 5, 1999, pp. 19-37.

Melachrinoudis, E. and Zhang, F.G., "An O(mn) Algorithm for the 1-Maximin Problem on a Network," Computers and Operations Research, Vol. 26, 1999, pp. 849-869.

Min, H. and Melachrinoudis, E., "The Relocation of a Hybrid Manufacturing/Distribution Facility from Supply Chain Perspectives: A Case Study," Omega, The International Journal of Management Science, Vol. 27, 1999, pp.75-85.

Melachrinoudis, E., "Bicriteria Location of a Semi-Obnoxious Facility in an Existing Plant Layout," Computers and Industrial Engineering, Vol. 37, 1999, pp. 581-593.

He, H., Metghalchi, M. and Keck, J.C., "Estimation of the Thermodynamic Properties of Unbranched Hydrocarbons," ASME Journal of Energy Resources Technology, Vol. 121, 1999, pp. 45-50.

Narusawa, U., "The Second Law Analysis of Convective Pattern Change in a Rectangular Cavity," J. Fluid Mech., Vol. 392, 1999, pp. 361-377.

Nayeb-Hashemi, H. and Yang, Y., "Thermal Residual Stress Analysis of Nextel 440/Aluminum Composite," J. of Composites Technology and Research, ASTM, Vol. 21, No. 3, 1999, pp. 133-140.

Shan, D. and Nayeb-Hashemi, H., "Fatigue Life Prediction of SIC Particulate Reinforced Aluminum Alloy 6061 Matrix Composite, Using a Weibull Model," NDT & E International 32, 1999, pp. 265-274.

Nayeb-Hashemi, H. and Shan, D., "Evaluation of Heat Damage on B₄C Particulate Reinforced Aluminum Alloy Matrix Composite Using Acoustic Emission Techniques," Material Science and Engineering, A266, 1999, pp. 8-17.

Nayeb-Hashemi, H. and Shan, D., "Fatigue Life Prediction of SiC Particulate Reinforced Aluminum Alloy 6061 Matrix Composite Using AE Stress Delay Concept," J. of Material Science 34, 1999, pp. 3263-3273.

Nayeb-Hashemi, H. and Lin, H., "General Constitutive Relation of Anisotropic 6061-T6 Aluminum and Its Fatigue Life Under Proportional and Non-Proportional Loadings," J. of Testing and Evaluation, JTEVA, Vol. 27, No. 6, 1999, pp. 412-422.

Rossettos, J.N. and Sturtevant, S.C., "Post-Adhesive Yield Carrying Capacity of Single Lap Joints with Voids," Journal of Adhesion Science and Technology, Vol. 13, No. 1, 1999, pp. 49-63.

Godfrey, T.A. and Rossettos, J.N., "A Parameter for Comparing the Damage Tolerance of Stressed Plain Weave Fabrics," Textile Research Journal, Vol. 69, No. 7, 1999, pp. 503-511.

Godfrey, T.A. and Rossettos, J.N., "The Onset of Tear Propagation at Slits in Stressed Uncoated Plain Weave Fabrics," Journal of Applied Mechanics, Vol. 66, No. 4, 1999, pp. 926-933.

Taslim, M.E. and Lengkong, A., "45^o Round-Corner Rib Heat Transfer Coefficient Measurements in a Square Channel," J. of Turbomachinery, Vol. 121, 1999, pp. 1-9.

Wilson, B.H., Erin, C. and Messac, A., "Optimal Design of a Vibration Isolation Table Using Physical Programming," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 121, 1999, pp. 171-178.

Wilson, B.H., Eryilmaz, B. and Shafai, B., "An Adaptive Angular Sweep Algorithm for Value Set Construction," IEEE Transactions on Automatic Control, 1999, pp. 551-556.

Nieva, P.M., Zavracky, P.M., Adams, G.G., Tada, H., Abramson, A.R., Miaoulis, I.N. and Wong, P.Y., "Temperature Measurement During Rapid Thermal Annealing Using MEMS," Proceedings of the 5^th ASME/JSME Joint Thermal Engineering Conference, 1999, CD-ROM: AJTE99/6196.

Adams, G.G., "The Sliding of an Elastic Half-Space Against a Rigid Surface with Friction Reduction Due to Incident Dilatational Waves," Proceedings of DETC'99, 1999 ASME Design Engineering Technical Conferences, CD-ROM: DETC99VIB-8138.

Rensing, N.M., Dodson, S., Adams, G.G., Zavracky, P.M., McClelland, R.W. and Lemoncelli, A., "Modeling, Simulation, and Testing of the Nonlinear Oscillations of a MEMS Torsional Mirror with Mechanical-Electrostatic Coupling," Micro-Electro-Mechanical Systems, 1999 ASME International Congress and Exposition, MEMS Vol. 1, 1999, pp. 143-150.

Truong, T.Q., Barnes, T.G., Lu, X., Adams, G.G. and McGruer, N.E., "Design, Analysis, Fabrication, and Testing of a MEMS Contact/Bending Sensor with Improved Dynamic Range," Micro-Electro-Mechanical Systems, 1999 ASME International Congress and Exposition, MEMS Vol. 1, 1999, pp. 201-208.

Barnes, T.G., Truong, T.Q., Lu, X., McGruer, N.E. and Adams, G.G., "Design, Analysis, Fabrication, and Testing of a MEMS Flow Sensor," Micro-Electro-Mechanical Systems, 1999 ASME International Congress and Exposition, MEMS Vol. 1, 1999, pp. 355-361.

Benneyan, J.C., "Design and Use of g Statistical Control Charts," Industry, Engineering, and Management Systems International 1999 Conference Proceedings, March 1999, pp. 442-447.

Benneyan, J.C., "Geometric Based g-Type Statistical Control Charts for Infrequent Adverse Events," Institute of Industrial Engineers Society for Health Systems Conference Proceedings, September 1999, pp. 175-186.

Gorlov, A.M., "Zero-Head Hydro and Wind Energy Systems with Helical Turbines," Int’l. Conference on Climate Change and Alternative Energy for Korea, Seoul, Korea, 1999, pp. 213-255.

Gorlov, A.M., "Ocean Power Farm for Hydrogen Production," Int’l. PACON Conference, 1999, Moscow, Russia, CD-ROM.

Veerakamolmal, P. and Gupta, S.M., "Automating Multiple Products Disassembly Process Planning with Case-Based Reasoning," Proceedings of the Second International Conference on Operations and Quantitative Management, Ahmedabad, India, January 1999, pp. 24-33.

Gupta, S.M. and Veerakamolmal, P., "A Case-Based Reasoning Approach for the Optimal Planning of Disassembly Processes," Proceedings of the Second International Seminar on Reuse, Eindhoven, The Netherlands, March 1999, pp. 141-150.

Guide, Jr., V.D.R. and Gupta, S.M., "A Queueing Network Model for Remanufacturing Production Systems," Proceedings of the Second International Seminar on Reuse, Eindhoven, The Netherlands, March 1999, pp. 115-128.

Aksoy, H.K. and Gupta, S.M., "An Analytical Model for Remanufacturing Systems," Proceedings of the 1999 Annual Meeting of the Northeast Decision Sciences Institute, Newport, Rhode Island, March 1999, pp. 83-85.

Gungor, A. and Gupta, S.M., "Disassembly Line Balancing," Proceedings of the 1999 Annual Meeting of the Northeast Decision Sciences Institute, Newport, Rhode Island, March 1999, pp. 193-195.

Veerakamolmal, P. and Gupta, S.M., "Designing Electronics Products for Disassembly Using Benefit/Cost Analysis," Proceedings of the 1999 Annual Meeting of the Northeast Decision Sciences Institute, Newport, Rhode Island, March 1999, pp. 189-191.

Veerakamolmal, P. and Gupta, S.M., "Reusable-Component Requirements Planning for the Integrated Remanufacturing System," Proceedings of the 25^th International Conference on Computers and Industrial Engineering, New Orleans, Louisiana, March 1999, pp. 58-61.

Aksoy, H.K. and Gupta, S.M., "An Open Queueing Network Model for Remanufacturing Systems," Proceedings of the 25^th International Conference on Computers and Industrial Engineering, New Orleans, Louisiana, March 1999, pp. 62-65.

Gungor, A. and Gupta, S.M., "A Systematic Solution Approach to the Disassembly Line Balancing Problem," Proceedings of the 25^th International Conference on Computers and Industrial Engineering, New Orleans, Louisiana, March 1999, pp. 70-73.

Nakashima, K. and Gupta, S.M., "Analysis of a Supplier Management System Using Generalized Stochastic Petri Net," 25^th International Conference on Computers and Industrial Engineering, New Orleans, Louisiana, March 1999, pp. 75-78.

Veerakamolmal, P. and Gupta, S.M., "A Combinatorial Cost-Benefit Analysis Methodology for Designing Modular Electronic Products for the Environment," Proceedings of the 1999 IEEE International Symposium on Electronics and the Environment, Danvers, Massachusetts, May 1999, pp. 268-273.

Boon, J., Gupta, S.M. and Isaacs, J.A., "Economic Modeling of Electric Vehicle Recycling," Proceedings of the International Symposium on Manufacturing and Robotics, Ottawa, Canada, August 1999, pp. 1-8.

Nakashima, K. and Gupta, S.M., "Performance Evaluation of a Supplier Management System with Stochastic Variability," Proceedings of the Second Asia-Pacific Conference on Industrial Engineering and Management Systems, Kanazawa, Japan, October 1999, pp. 409-412.

Ilegbusi, O.J. and Yang, J., "Effect of Matrix Alloying on and Reinforcement Coating on Porosity Nucleation in Metal Matrix Composites," Proc. ASME/IMECE, MD-Vol. 89, Ilegbusi, O.J., Oyeleye, G.O. and Coulter, J.P., (eds.), 1999, pp. 19-24.

Mat, M.D., Kaplan, Y. and Ilegbusi, O.J., "Application of a Bubble-Induced Turbulence Model to Subcooled Boiling in a Vertical Pipe," Proc. ASME/IMECE, MD-Vol. 89, Ilegbusi, O.J., Oyeleye, G.O. and Coulter, J.P., (eds.), 1999, pp. 49-56.

Ilegbusi, O.J. and Yang, J., "Effect of Si-Al Alloy on Kinetics of Reaction-Bonded SiC Infiltration Process," Proc. ASME/IMECE, MD-Vol. 89, Ilegbusi, O.J., Oyeleye, G.O. and Coulter, J.P., (eds.), 1999, pp. 65-70.

Mat, M.D. and Ilegbusi, O.J., "Prediction of Phase Segregation During Mold Filling of Semi-Solid Slurries," Proc. ASME/IMECE, MD-Vol. 89, Ilegbusi, O.J., Oyeleye, G.O. and Coulter, J.P., (eds.), 1999, pp. 79-88.

Isaacs, J.A., "Integrating Economic and Environmental Assessment in Advanced Materials Manufacturing," 1999 NSF Design and Manufacturing Grantees Conference Proceedings, Long Beach, California, January 1999, CD-ROM.

Chiango, D.A., Isaacs, J.A. and Miller, S.A., "Titanium Powder Production by PREP: An Economic Case Study," Proceedings of APMI 1999 International Conference on Powder Metallurgy and Particulate Materials, Vancouver, British Columbia, Canada, June 1999, pp. 199-208.

Chinnaiah, P.S.S., Kamarthi, S.V., Cullinane, T.P., Dendy, J.A., Milner, L.A.A., "Attributes and Quantification of Agility of a Library," Proceedings of the 8^th Industrial Research Conference (Research 99), Phoenix, Arizona, May 1999, CD-ROM.

Dad, S., Kamarthi, S.V. and Cullinane, T.P., "Detection of Wrap-Up Incidents in a Napping Machine," Proceedings of the 1999 ASME International Mechanical Engineering Congress, Nashville, Tennessee, MD-Vol. 89, 1999, pp. 1-6.

Pittner, S., Kamarthi, S.V., Wongsiripatanakul, P. and Wongvasu, N., "In-Process Surface Roughness Estimation in Finish Turning Processes," Proceedings of the Conference on Artificial Neural Networks in Engineering (ANNIE'99), Intelligent Engineering Systems Through Artificial Neural Networks, Dagli, C.H., Buczak, A.L., Ghosh, J. and Erosy, O., (eds.), St. Louis, Missouri, November 1999, Vol. 9, New York, ASME Press, 1999, pp. 1101-1106.

Whalen, R.A. and Kowalski, G.J., "Simplified Technique For Calculating Component Temperatures on a Circuit Board with Varying Component Heat Transfer Coefficients," The 1999 IMECE, Nashville, Tennessee, 1999, ASME paper EEPD 1/99.

Lee, S. and Doraiswamy, R., "A Framework for a Worldwide Process Planning System in Virtual Enterprises," Proceeding of ’99 Industrial Engineering Research Conference, Phoenix, Arizona, 1999, CD-ROM.

Lee, S. and Braidic, J., "An Object Oriented Resource Information Model for Manufacturing," Proceeding of ’99 Industrial Engineering Research Conference, Phoenix, Arizona, 1999, CD-ROM.

Levendis, Y.A., Atal, A. and Courtemanche, B., "Effects of the Furnace Temperature on the CO, CO$_2$, NO$_x$ and m Unburned Hydrocarbon Emissions from the Combustion of Coal and Alternative Fuels," Proceedings of the 24^th Coal Utilization & Fuel Systems International Conference, Clearwater, Florida, March 1999, pp. 69-81.

Levendis, Y.A. and Atal, A., "Hot Flue Gas Filtration: A New Development," Proceedings of the 24^th Coal Utilization & Fuel Systems International Conference, Clearwater, Florida, March 1999, pp. 647-659.

Levendis, Y.A., "On the Combustion and Emissions of Typical Waste Plastics," Proceedings of the REWAS'99, Global Symposium on Recycling, Waste Treatment and Clean Technology, San Sebastian, Spain, September 1999, pp. 879-888.

Melachrinoudis, E. and Min, H., "The Dynamic Relocation and Phase-Out of a Hybrid, Two Echelon Plant/Warehousing Facility: A Multiple Programming Approach," Proceedings of the 5^th International Conference of the Decision Sciences Institute, Vol. I, 1999, pp. 961-963.

Min, H. and Melachrinoudis, E., "The Three-Hierarchical Location-Allocation of Banking Facilities with Risk and Uncertainty," Proceedings of the 30^th Annual Meeting of the Decision Sciences Institute, Vol. 3, 1999, pp. 1322-1324.

Chen, W., Sahai, A., Messac, A. and Sundararaj, G.J., "Physical Programming for Robust Design," 40^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference and Exhibit, St. Louis, Missouri, Paper # AIAA-99-1206 (A99-24604), Session SDM-02, April 1999, pp. 17-26.

Ramaswamy, V., Lewis, K., Messac, A. and Sundararaj, G.J, "Discrete Subsystem Selection Using Physical Programming," Paper # AIAA-99-1208, (A99-24606), 40^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference and Exhibit, St. Louis, Missouri, April 1999, pp. 42-52.

Tappeta, R.V., Renaud, J.E., Messac, A. and Sundararaj, G.J, "Interactive Physical Programming: Tradeoff Analysis and Decision Making in Multidisciplinary Optimization," Paper # AIAA-99-1209 (A99-24607), 40^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, St. Louis, Missouri, April 1999, pp. 53-67.

Messac, A., Sundararaj, J.G., Tappeta, R.V. and Renaud, J.E., "The Ability of Objective Functions to Generate Non-Convex Pareto Frontiers," Paper # AIAA-99-1211 (A99-24609), Session SDM-02, 40^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference and Exhibit, St. Louis, Missouri, April 1999, pp. 78-87.

Hamiroune, D., Metghalchi, M. and Keck, J.C., "Rate-Controlled Constrained-Equilibrium Method Applied to Formaldehyde-Oxygen Mixture," Proceedings of 1999 Joint Technical Meeting of the United States Section: The Combustion Institute, The George Washington University, Washington, D.C., March 1999, pp. 433-466.

Elia, M., Moore, P., Ulinski, M. and Metghalchi, M., "Laminar Burning Velocity of Methane-Oxygen-Argon (CH₄-O₂-Ar) Mixtures," Proceedings of the Spring 1999 ASME Internal Combustion Engine Division, ICE Vol. 32-2, 1999, pp. 89-93.

Ulinski, M., Li, Z., Elia, M., Fletcher, C. and Metghalchi, M., "Burning Velocity Measurements in Micro-Gravity Conditions," Proceedings of 1999 Eastern States Section of the Combustion Institute, North Carolina State University, North Carolina, October 1999, pp. 359-362.

He, H., Metghalchi, M. and Keck, J.C., "Estimation of the Thermodynamic Properties of Branched Hydrocarbons," Proceedings of the 1999 ASME Advanced Energy System Division, AES-Vol. 39, 1999, pp. 247-255.

Nayeb-Hashemi, H., Kasomino, P. and Saniei, N., "Nondestructive Evaluation of Fiberglass Reinforced Plastic Subjected to Combined Localized Heat Damage and Fatigue Damage Using Acoustic Emission," ASME Winter Annual Meeting, MD-Vol.86/AMD-Vol. 232, Durability and Damage Tolerance of Composite Materials and Structures-1999, pp. 11-24.

Shan, D. and Nayeb-Hashemi, H., "Evaluation of Heat Damage on B₄C Particulate Reinforced Aluminum Alloy Matrix Composite Using Acoustic Emission Techniques," ASME Winter Annual Meeting, Durability and Damage Tolerance of Composite Materials and Structures-1999, MD-Vol.86/AMD-Vol. 232, pp. 25-39.

Nayeb-Hashemi, H., Harrison, A., Kisnomo, P. and Saniei, N., "Effect of Localized Heat Damage on the Natural Frequency of Glass Fiber Reinforced Plastic," Proceedings of DETC99: ASME 17^th Biennial Conference on Mechanical Vibration and Noise, Las Vegas, Nevada, September 1999, DETC 99/VIB-8148, pp. 1-11.

Hamidzadeh, H.R., Prescher, J.L. and Nayeb-Hashemi, H., "Dynamic Response of Adhesively Bonded Beams Subjected to Harmonic Peeling Loads," Proceedings of DETC99: ASME 17^th Biennial Conference on Mechanical Vibration and Noise, Las Vegas, Nevada, September 1999, DETC 99/VIB-8147, pp. 12-23.

Godfrey, T.A. and Rossettos, J.N., "Damage Growth in Stressed Structural Fabrics," Proceedings of the 17^th Canadian Congress of Applied Mechanics, Hamilton, Ontario, Canada, Vol. 1, 1999, pp. 27-29.

Godfrey, T.A. and Rossettos, J.N., "On a Parameter for Comparing the Damage Tolerance Of Plain Weave Fabrics," Proceedings of the 15^th Army Symposium on Solid Mechanics, Myrtle Beach, South Carolina, April 1999, pp. 201-214.

Shafai, B., Uddin, V., Wilson, B. and Chen, J., "A Structurally Constrained LMI Approach to Maximizing the Real Stability Radius by State Feedback," Proceedings of American Control Conference, San Diego, California, 1999, pp. 1886-1888.

Angus, R.B., Gundersen, N.A. and Cullinane, T.P., Planning, Performing and Controlling Projects, 2^nd Edition, Prentice Hall, September, 1999.

Mital, A., Gupta, S.M., Badiru, A.B., Hvam, L., Jain, V.K., Martin-Vega, L.A., Thomas, M.U., Ventura, J. and Williams, E.J., Senior Editors, "Industrial Engineering Applications and Practice: Users’ Encyclopedia," published by International Journal of Industrial Engineering - Applications and Practice, ISBN 0-9654 506-0-0, 1999, CD-ROM.

Veerakamolmal, P. and Gupta, S.M., "Disassembly," in Industrial Engineering Applications and Practice: Users’ Encyclopedia, published by International Journal of Industrial Engineering - Applications and Practice, ISBN 0-9654 506-0-0, 1999, CD-ROM.

Gupta, S.M., "Flexible Kanban System," in Industrial Engineering Applications and Practice: Users’ Encyclopedia, published by International Journal of Industrial Engineering - Applications and Practice, ISBN 0-9654 506-0-0, 1999, CD-ROM.

Ilegbusi, O.J., Iguchi, M. and Wahnsiedler, W., Mathematical and Physical Modeling of Materials Processing Operations, Chapman & Hall/CRC Press, New York, 1999.

Ilegbusi, O.J., Oyeleye, G.O. and Coulter, J.P., (eds.), The Science, Automation, and Control of Material Processes Involving Coupled Transport Rheology Changes, ASME, Publication, MD-Vol. 89, New York, 1999.

Melachrinoudis, E., "Economic Order Quantity," in Industrial Engineering Applications and Practice: Users Encyclopedia, Mital, A., (ed.), International Journal of Industrial Engineering, 1999, CD-ROM.

Wilson, B.H. and Mourant, R.R., Virtual Reality, in McGraw-Hill Yearbook of Science and Technology 2000, McGraw-Hill, 1999.

Majumder, S., McGruer, N.E., Adams, G.G., Zavracky, P.M., Morrison, R.H. and Krim, J., "Adhesion Properties of Gold-on-Gold Microswitch Contacts," American Vacuum Society, 46^th Annual Symposium Abstracts, 1999, p. 141.

Chun, J.-H., Qui, T., Feng, Z and Ando, T., "Fundamental Studies of Microdroplet Deposition in the Droplet-Based Manufacturing Process," Proceedings of the 1999 NSF Design and Manufacturing Grantees Conf., Long Beach, California, January 1999.

Chowdhury, A. and Fard, N., "Decision Rules for Censored Response Data in a Factorial Experiment," Annual ISSAT International Conference on Quality and Reliability, August 1999.

Chandra, S. and Messac, A., "Cost Optimization in Design Using Physical Programming," Third World Congress of Structural and Multidisciplinary Optimization (WCSMO-3), Buffalo/Niagara Falls, New York, May 1999.

Mourant, R.R., Patadia, J. and Al-Shihabi, T., "Dynamic Visualization of Roads and Traffic from a User’s Viewpoint," in Proceedings of the 1999 3D in Transportation Symposium and Workshop (CD-ROM), Transportaion Research Board, 1999, CD-ROM.

Godfrey, T.A. and Rossettos, J.N., "The Onset of Tear Propagation at Slits in Stressed Uncoated Plain Weave Fabrics," Proceedings of the Fiber Society Annual Conference, Clemson, South Carolina, October 1999.

Rahrooh, A. and Buchanan, W.W., "Multi-Step Matrix Integrators for Real-Time Simulation of Nonlinear Systems Via Estimation Methods," Computers In Education Journal, Northeast Consortium for Engineering Education, Port Royal, Virginia, Vol. 9, No. 1, January-March 1999, pp. 50-56. (Awarded the Harden-Simons Prize for the Outstanding Paper on Computational Methods).

Cole, W.A., "Graphical Applications: Analysis, Manufacturing, and Documentation," EDGD Journal, 1999, p. 43.

Buchanan, W.W. and Bostwick, W.D., "Innovative Methods for Long Distance Learning," Proceedings 1999 ASEE Conference for Industry and Education Collaboration, Palm Springs, California, February 1999, pp. 165-169.

Spektor, M. and Buchanan, W.W., "Delivering a Manufacturing Engineering Technology Program to the Boeing Company," Proceedings 1999 ASEE Annual Conference, North Carolina Universities Consortium, Charlotte, North Carolina, June 1999, pp. 254751-54.

Yurtseven, M.K. and Buchanan, W.W., "A Model for Assessing the Effect of New Technologies on Productivity," Proceedings 1999 Portland International Conference on Management of Engineering and Technology, Portland State University, Portland, Oregon, July 1999, pp. 721-723.

Bostwick, W.D. and Buchanan, W.W., "The Shape of Engineering Education for 2010," Proceedings 1999 International Conference on Engineering and Computer Education, State University of Campinas, Rio de Janeiro, Brazil, August 1999, pp. 114-118.

Cole, W.A., "Graphical Applications: Analysis, Manufacturing," Proceedings Engineering Design Graphics Division of ASEE 53^rd Mid-Year Meeting, January 1999, Vol. I, No. 4, pp. 163-171.

Hulbert, T., Angus, R. and Hansberry, E., "The Development and Growth of a Professional Engineering Program," Proceedings 1999 ASEE Annual Conference, North Carolina Universities Consortium, Charlotte, North Carolina, June 1999, pp. 352221-10.

Buchanan, W.W., Tilmans, A.L., Gentry, D. and Crossman, G., "Web Based Distance Learning - Success, Challenges, Risks, the Future," Engineering Technology Leadership Institute, University of North Texas, Denton, Texas, October 25, 1999.

Hansberry, E. and Hoop, B., "An Experiment in Physical Science Educational Reform," Published Letter in the Forum on Education of the American Physical Society, Fall 1999, p. 1.