Route Reply (RREP) Message Format. More...
#include <aodv-packet.h>
Public Member Functions | |
RrepHeader (uint8_t prefixSize=0, uint8_t hopCount=0, Ipv4Address dst=Ipv4Address(), uint32_t dstSeqNo=0, Ipv4Address origin=Ipv4Address(), Time lifetime=MilliSeconds(0), uint16_t channel=1) | |
c-tor | |
bool | operator== (RrepHeader const &o) const |
void | SetHello (Ipv4Address src, uint32_t srcSeqNo, Time lifetime) |
Configure RREP to be a Hello message. | |
Fields | |
void | SetHopCount (uint8_t count) |
uint8_t | GetHopCount () const |
void | SetDst (Ipv4Address a) |
Ipv4Address | GetDst () const |
void | SetDstSeqno (uint32_t s) |
uint32_t | GetDstSeqno () const |
void | SetOrigin (Ipv4Address a) |
Ipv4Address | GetOrigin () const |
void | SetRXChannel (uint16_t s) |
uint16_t | GetRXChannel () const |
void | SetLifeTime (Time t) |
Time | GetLifeTime () const |
Flags | |
void | SetAckRequired (bool f) |
bool | GetAckRequired () const |
void | SetPrefixSize (uint8_t sz) |
uint8_t | GetPrefixSize () const |
Public Member Functions inherited from ns3::ObjectBase | |
void | GetAttribute (std::string name, AttributeValue &value) const |
bool | GetAttributeFailSafe (std::string name, AttributeValue &attribute) const |
void | SetAttribute (std::string name, const AttributeValue &value) |
bool | SetAttributeFailSafe (std::string name, const AttributeValue &value) |
bool | TraceConnect (std::string name, std::string context, const CallbackBase &cb) |
bool | TraceConnectWithoutContext (std::string name, const CallbackBase &cb) |
bool | TraceDisconnect (std::string name, std::string context, const CallbackBase &cb) |
bool | TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb) |
Private Attributes | |
uint16_t | m_channelNo |
Source RX channel number. | |
Ipv4Address | m_dst |
Destination IP Address. | |
uint32_t | m_dstSeqNo |
Destination Sequence Number. | |
uint8_t | m_flags |
A - acknowledgment required flag. | |
uint8_t | m_hopCount |
Hop Count. | |
uint32_t | m_lifeTime |
Lifetime (in milliseconds) | |
Ipv4Address | m_origin |
Source IP Address. | |
uint8_t | m_prefixSize |
Prefix Size. | |
Header serialization/deserialization | |
TypeId | GetInstanceTypeId () const |
uint32_t | GetSerializedSize () const |
void | Serialize (Buffer::Iterator start) const |
uint32_t | Deserialize (Buffer::Iterator start) |
void | Print (std::ostream &os) const |
static TypeId | GetTypeId () |
Additional Inherited Members | |
Static Public Member Functions inherited from ns3::Header | |
static TypeId | GetTypeId (void) |
Static Public Member Functions inherited from ns3::Chunk | |
static TypeId | GetTypeId (void) |
Static Public Member Functions inherited from ns3::ObjectBase | |
static TypeId | GetTypeId (void) |
Protected Member Functions inherited from ns3::ObjectBase | |
void | ConstructSelf (const AttributeConstructionList &attributes) |
virtual void | NotifyConstructionCompleted (void) |
Route Reply (RREP) Message Format.
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type |R|A| Reserved |Prefix Sz| Hop Count | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Destination IP address | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Destination Sequence Number | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Originator IP address | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Lifetime | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Doxygen introspection did not find any typical Config paths.
No Attributes are defined for this type.
No TraceSources are defined for this type.
Definition at line 183 of file aodv-packet.h.
|
virtual |
start | an iterator which points to where the header should written. |
This method is used by Packet::RemoveHeader to re-create a header from the byte buffer of a packet. The data read is expected to match bit-for-bit the representation of this header in real networks.
Implements ns3::Header.
Definition at line 329 of file aodv-packet.cc.
References ns3::Buffer::Iterator::GetDistanceFrom(), GetSerializedSize(), m_channelNo, m_dst, m_dstSeqNo, m_flags, m_hopCount, m_lifeTime, m_origin, m_prefixSize, NS_ASSERT, ns3::Buffer::Iterator::ReadNtohU32(), ns3::Buffer::Iterator::ReadU16(), and ns3::Buffer::Iterator::ReadU8().
|
virtual |
This method is typically implemented by ns3::Object::GetInstanceTypeId but some classes which derive from ns3::ObjectBase directly have to implement it themselves.
Implements ns3::ObjectBase.
Definition at line 304 of file aodv-packet.cc.
|
virtual |
This method is used by Packet::AddHeader to store a header into the byte buffer of a packet. This method should return the number of bytes which are needed to store the full header data by Serialize.
Implements ns3::Header.
Definition at line 310 of file aodv-packet.cc.
Referenced by Deserialize().
|
virtual |
os | output stream This method is used by Packet::Print to print the content of a trailer as ascii data to a c++ output stream. Although the trailer is free to format its output as it wishes, it is recommended to follow a few rules to integrate with the packet pretty printer: start with flags, small field values located between a pair of parens. Values should be separated by whitespace. Follow the parens with the important fields, separated by whitespace. i.e.: (field1 val1 field2 val2 field3 val3) field4 val4 field5 val5 |
Implements ns3::Header.
Definition at line 348 of file aodv-packet.cc.
References m_channelNo, m_dst, m_dstSeqNo, m_lifeTime, m_origin, and m_prefixSize.
|
virtual |
start | an iterator which points to where the header should be written. |
This method is used by Packet::AddHeader to store a header into the byte buffer of a packet. The data written is expected to match bit-for-bit the representation of this header in a real network.
Implements ns3::Header.
Definition at line 316 of file aodv-packet.cc.
References m_channelNo, m_dst, m_dstSeqNo, m_flags, m_hopCount, m_lifeTime, m_origin, m_prefixSize, ns3::Buffer::Iterator::WriteHtonU32(), ns3::Buffer::Iterator::WriteU16(), and ns3::Buffer::Iterator::WriteU8().